I thought I'd give this a whirl on a spare disk on a test machine, so I
nabbed the ISO from ftp.freebsd.org and burnt to CD. I've tried booting from
the CD directly and creating floppies from the kern/mfsroot.flp, both result
in identical panics at exactly the same point.

ed1: <Plug & Play Ethernet Card at port 0x2a0-0x2bf irq 2 on isa0
panic: inthand_add: Can't initialize ICU

As it happens the same machine has a recent 4.5-STABLE on another disk so
the dmesg output from that is below. Any help anyone could give in getting
this going would be most appreciated, also I'm not subscribed to the current
mailing list since this is my first foray into playing with -current, so if
I could be cc'd on any replies.


4.5-STABLE dmesg output:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #6: Sat Mar 23 01:16:38 GMT 2002
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DREADNAUGHT
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.32-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x651  Stepping = 1

real memory  = 402587648 (393152K bytes)
config> q
avail memory = 386990080 (377920K bytes)
Preloaded elf kernel "kernel" at 0xc03e8000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03e809c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fd9b0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff
at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra TNT2 graphics accelerator> at 0.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 12
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse \M-. with IntelliEye, rev 1.10/1.00,
addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
dc0: <82c169 PNIC 10/100BaseTX> port 0xe400-0xe4ff mem 0xe9000000-0xe90000ff
irq 5 at device 9.0 on pci0
dc0: Ethernet address: 00:a0:cc:42:32:7c
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xe800-0xe81f irq 7 at device 10.0 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ed0: <Plug & Play Ethernet Card> at port 0x2a0-0x2bf irq 11 on isa0
ed0: address 00:4f:4c:05:17:31, type NE2000 (16 bit)
IP Filter: v3.4.20 initialized.  Default = pass all, Logging = enabled
ad0: 8063MB <IBM-DHEA-38451> [16383/16/63] at ata0-master UDMA33
ad1: 19574MB <WDC WD205BA> [39770/16/63] at ata0-slave UDMA33
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-103S 0114> at ata1-slave PIO4
Mounting root from ufs:/dev/ad1s1a
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to deny, logging disabled

Andrew Tulloch
Lead Web Developer
Great4 Ltd
2nd Floor
200 Grays Inn Road
Tel: 0207 316 3126
Mob: 07971 677 035

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to