Hi Folks. I spent some time tracking down my CardBus problem and found the following:
In /sys/i386/pci/pci_cfgreg.c: In Function: static int pci_cfgintr_linked(struct PIR_entry *pe, int pin): There you can find this code (my changes included): /* link destination mapped to a unique interrupt? */ /* if (powerof2(pi->irqs)) { // i changed this line to the next line of code */ /* the reason is given below*/ /* On my system the CardBus bridge has no interrupt assigned (lazy BIOS I would say). So pi->irqs is 0. powerof2 returns true (which is wrong as ahown below). Then ffs returs 0. that - 1 gives an irq of -1 whis is totally wrong) The if clause must evaluate to false if there is no interrut assigned otherwise the system will panic during boot as I experineced it. */ /* I added "&& pi->irqs != 0 */ if (powerof2(pi->irqs) && pi->irqs != 0) { irq = ffs(pi->irqs) - 1; PRVERB(("pci_cfgintr_linked: linked (%x) to hard-routed irq %d\n", pi->link, irq)); return(irq); } In my opinion the macro powerof2(x) defined in /sys/i386/sys/param.h is correct for all input values except 0 (zero). Proof for zero being illegal input: powerof2(0) = ((((0x00000000)-1) & (0x00000000)) == 0) = ((( 0xffffffff ) & (0x00000000)) == 0) = (( 0x00000000 ) == 0) = true Since zero is not a power of 2 the returnvalue of powerof2(0) is wrong. ---- This change may have implictions I do not forsee, so I leave to the experts what should be done about it. In my eyes a similar change may be useful in function pci_cfgintr_unique(..,..). Now, the system is booting without panic. It does assign an Interrupt for the CardBus Bridge and my CardBus NIC is detected. But all this didnt't sove my problem entirely. Although the network card driver (dc) is loading it is still not configured the right way. I get a watchdog timeout when trying to use the interface. The shown MAC adres is also not correct. I am eager to hear your comment on this issue. This is my dmesg output with the above mentioned patch applied (boot -v): ---- Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-DP1 #1: Fri Apr 12 12:22:33 GMT 2002 root@:/usr/src/sys/i386/compile/NEWCARD Preloaded elf kernel "/boot/kernel/kernel" at 0xc0536000. Calibrating clock(s) ... TSC clock: 450965769 Hz, i8254 clock: 1193032 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 451024942 Hz CPU: Pentium III/Pentium III Xeon/Celeron (451.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268369920 (262080K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0055d000 - 0x0ffe7fff, 262713344 bytes (64139 pages) avail memory = 255537152 (249548K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fdb70 bios32: Entry = 0xfdb80 (c00fdb80) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdba1 pnpbios: Found PnP BIOS data at 0xc00f5de0 pnpbios: Entry = f0000:5744 Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00f6420 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 map[20]: type 4, range 32, base 0000e800, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=9 map[90]: type 4, range 32, base 00000440, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 map[10]: type 4, range 32, base 0000ea00, size 8, enabled found-> vendor=0x125d, dev=0x1968, revid=0x00 bus=0, slot=9, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac1c, revid=0x01 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac1c, revid=0x01 bus=0, slot=10, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febfff00, size 8, enabled map[14]: type 4, range 32, base 0000ee00, size 3, enabled map[18]: type 4, range 32, base 0000ec00, size 8, enabled found-> vendor=0x11c1, dev=0x0448, revid=0x01 bus=0, slot=12, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 intpin=a, irq=9 powerspec 2 supports D0 D2 D3 current D0 pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xcfff pcib1: memory decode 0xfca00000-0xfeafffff pcib1: prefetched decode 0xff900000-0xff9fffff pci1: physical bus=1 map[10]: type 1, range 32, base fd000000, size 24, enabled map[14]: type 4, range 32, base 0000c800, size 8, enabled map[18]: type 1, range 32, base feaff000, size 12, enabled found-> vendor=0x1002, dev=0x4c42, revid=0xdc bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 7f 7f ata1: mask=03 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe800-0xe81f irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <multimedia, audio> at device 9.0 (no driver attached) pccbb0: <TI1225 PCI-CardBus Bridge> at device 10.0 on pci0 cardbus0: <CardBus bus> on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 pci_cfgintr_search: linked (62) to configured irq 9 at 0:9:0 pci_cfgintr: 0:10 INTA routed to irq 9 pccbb1: <TI1225 PCI-CardBus Bridge> at device 10.1 on pci0 cardbus1: <CardBus bus> on pccbb1 pccard1: <16-bit PCCard bus> on pccbb1 pci_cfgintr_search: linked (62) to configured irq 9 at 0:9:0 pci_cfgintr: 0:10 INTA routed to irq 9 pci0: <simple comms> at device 12.0 (no driver attached) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() pnpbios: 17 devices, largest 218 bytes PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00 PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0xffeffff, size=0xfef0000 PNP0c01: adding fixed memory32 range 0xfff0000-0xfff7fff, size=0x8000 PNP0c01: adding fixed memory32 range 0xfff8000-0xfffffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 pnpbios: handle 1 device ID PNP0000 (0000d041) PNP0200: adding dma mask 0x10 PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1 PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1 PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1 PNP0200: adding fixed io range 0xc0-0xdf, size=0x20, align=0x1 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1 pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1 pnpbios: handle 4 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0303 (0303d041) PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 6 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x440-0x44f, size=0x10, align=0x1 PNP0c02: adding io range 0x400-0x43f, size=0x40, align=0x1 PNP0c02: adding fixed memory32 range 0xcf000-0xcffff, size=0x1000 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0x1 PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0x1 PNP0c02: adding io range 0x62-0x63, size=0x2, align=0x1 PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0x1 PNP0c02: adding io range 0x72-0x7d, size=0xc, align=0x1 PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1 PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0x1 PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1 PNP0c02: adding io range 0x3800-0x383f, size=0x40, align=0x1 pnpbios: handle 9 device ID PNP0c02 (020cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 pnpbios: handle 10 device ID PNP0501 (0105d041) SMCf010: adding io range 0x3e8-0x3ef, size=0x8, align=0x8 SMCf010: adding io range 0x100-0x107, size=0x8, align=0x8 SMCf010: adding irq mask 0x8 SMCf010: adding dma mask 0x1 pnpbios: handle 11 device ID SMCf010 (10f0a34d) PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8 PNP0400: adding irq mask 0x80 pnpbios: handle 12 device ID PNP0400 (0004d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 13 device ID PNP0700 (0007d041) pnpbios: handle 14 device ID PNP0e03 (030ed041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 15 device ID PNP0f13 (130fd041) pnpbios: handle 16 device ID PNP0a03 (030ad041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0 adv0 failed to probe on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: failed to get data. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:00, syncbits:00 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) pmtimer0 on isa0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0800> failed to probe at port 0x61 on isa0 adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330. Failing probe. unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> at port 0x22-0x3f,0x10-0x1f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 adv1: Invalid baseport of 0x3e8 specified. Nearest valid baseport is 0x330. Failing probe. sio4: irq maps: 0x1 0x9 0x1 0x1 sio4: <SMCf010> at port 0x100-0x107,0x3e8-0x3ef irq 3 drq 0 on isa0 sio4: type 16550A unknown: <PNP0400> can't assign resources (port) unknown: <PNP0400> at port 0x378-0x37f on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 unknown: <PNP0e03> failed to probe on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 BIOS Geometries: 0:0313fe3f 0..787=788 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. procfs registered bpf: lo0 attached bpf: ppp0 attached found-> vendor=0x1011, dev=0x0019, revid=0x41 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=128 cardbus0: Expecting link target, got 0x0 cardbus0: Resource not specified in CIS: id=10, size=80 cardbus0: Resource not specified in CIS: id=14, size=400 dc0: <Intel 21143 10/100BaseTX> port 0x1000-0x107f mem 0x84002000-0x840023ff irq 9 at device 0.0 on cardbus0 dc0: Ethernet address: 00:80:00:80:00:80 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x001018, model 0x0021, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: dc0 attached ad0: success setting UDMA2 on Intel chip Creating DISK ad0 ad0: <TOSHIBA MK6412MAT/K2.10 B> ATA-4 disk at ata0-master ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <TOSHIBA CD-ROM XM-1902B/1014> CDROM drive at ata1 as master acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ad0s2a ad0s1: type 0x7, start 63, end = 6136829, size 6136767 : OK ad0s2: type 0xa5, start 6136830, end = 12675284, size 6538455 : OK start_init: trying /sbin/init --------------- Greetings, Klaus Leibrandt To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message