Am Do , 2002-05-02 um 13.29 schrieb Harald Schmalzbauer:

PXEbooting the -stable kernel.gz and mfsroot results in the same system
hang (mounting root from ufs:/dev/md0c).

DP1 crashes with the following:
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c03> can't assign resources (memory)
psmcpnp0: irq resource info is missing; assuming irq 12

Fatal trap12: page fault while in kernel mode
fault virtual address   = 0x0
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc164cac1
stack pointer           = 0x10:0xcb931d00
frame pointer           = 0x10:0xcb931d1c
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 27 (irq10: sn0)
trap number             = 12
panic: page fault

>From the console print I can't find a sn device nor any assigned irq10.

Hardware description:

PIII-M (LV) 800
256MB (2x 128MB mini DIMM)
i815em VGA/Chipset, heavily Sony-modified Award BIOS (showing only one
IDE while FreeBSD claims to find also secondary, almost no adjustments
possible (except PNP-OS yes/no))
Orinoco mini-PCI WaveLAN
USB-MemoryStick reader
TexasInstruments IEEE-1394
TexasInstruments PCI-1410 CARDBUS CONTROLLER    
ICH Modem 80F2
82801BAM USB 2442
82801BAM USB 2444
Intel Pro100/VE Ethernet (I think only PHY for i815)

I hope this helps helping me;-)



> Hello all,
> I'm trying to install FreeBSD 4.5-stable-iso from yesterday and I have
> the same problem like with 4.5-release: After probing the sistem hangs
> when trying to mount root from md.
> My box is a VAIO SRX41P with the PC-CARD CDROM. I have no Disk-Drive so
> unfortunately I can't check floppy-boot.
> I think this has something to do with PC-Card. I can remember I had a
> similar problem when PXE-booting a Soekris Net4501 (CF-Memory, no ATA).
> Right now I'm downloading DP1 to check it with 5.0.
> Just to mention: Booting OpenBSD is working but CD is not supported.
> Suggestions are welcome (BIOS doesn't boot USB-CD, no Floppy available,
> no Firewire CD, PXE-Boot possible but first I'll try 5.0).
> Thanks,
> -Harry
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-stable" in the body of the message

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to