After updating my SuperMicro 370DLE to today's sources, I'm seeing 
this message scroll repeatedly across my serial console (for different
values of N in the range 20-3f ):

ACPI-0988: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[N], disabling 

I've appended the boot log.



PS: ACPI used to fail early in the boot with:

    ACPI-0204: *** Error: AcpiLoadTables: Could not load namespace: AE_NOT_FOUND
    ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NOT_FOUND
ACPI: table load failed: AE_NOT_FOUND

That no longer seems to happen.

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Tue Jul  2 16:26:04 EDT 2002
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0444000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04440a8.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
real memory  = 536805376 (524224K bytes)
avail memory = 516304896 (504204K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  4, version: 0x000f0011, at 0xfec00000
 io1 (APIC): apic id:  5, version: 0x000f0011, at 0xfec01000
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00f5260
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <RCC    RCCNILE > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
IOAPIC #1 intpin 2 -> irq 2
IOAPIC #1 intpin 6 -> irq 5
IOAPIC #1 intpin 15 -> irq 9
pci0: <PCI bus> on acpi_pcib0
atapci0: <Promise ATA66 controller> port 
0xdf00-0xdf3f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem 
0xfe9a0000-0xfe9bffff irq 2 at device 2.0 on pci0
ata2: at 0xdff0 on atapci0
ata3: at 0xdfa8 on atapci0
pci0: <display, VGA> at device 4.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 
0xfc900000-0xfc9fffff,0xfcafe000-0xfcafefff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:d3:0b
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
ohci0: <OHCI (generic) USB controller> mem 0xfcaff000-0xfcafffff irq 10 at device 15.2 
on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
acpi_pcib1: <Host-PCI bridge> on acpi0
acpi_pcib1: we have duplicate bus number 0 - not probing bus
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 1 on motherboard
IOAPIC #1 intpin 8 -> irq 11
pci1: <PCI bus> on pcib1
pci1: <old, non-VGA display device> at device 1.0 (no driver attached)
orm0: <Option ROMs> at iomem 0xc9800-0xca7ff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pmtimer0 on isa0
Timecounters tick every 10.000 msec
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad4: 19092MB <ST320414A> [38792/16/63] at ata2-master UDMA66
acd0: CDROM <CDU5211> at ata1-master PIO4
MoSuMnPt:i nAgP  rCoPoUt  #f1r oLma uunfcsh:e/dd!ev
Entropy harvesting: interrupts ethernet point_to_point.
../../../vm/uma_core.c:1333: could sleep with "kernel linker" locked from 
kernel dumps on /dev/ad4s2b
swapon: adding /dev/ad4s2b as swap device
Starting file system checks:
/dev/ad4s3a: clean, 101699 free (299 frags, 0 blocks, 0.0% fragmentation)
/dev/ad4s3f: clean, 1670299 free (12779 frags, 0 blocks, 0.0% fragmentation)
/dev/ad4s3e: clean, 725440 free (104 frags, 0 blocks, 0.0% fragmentation)
Doing initial network setup: hostname.
    ACPI-0988: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[20], 
disabling event
    ACPI-0988: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[21], 
disabling event

<...> thousands of these deleted; I guess the event is not reall disabled...

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to