Hi everyone, the situation is the same as described in my previous posting, except: * new kernel from yesterday's sources * played around a bit with my device.hint, only minor changes.
Dmesg output from two boots is appended. First is an acpi-boot, second without acpi (unset acpi_load in loader) with location marked where the boot waits for approx. five minutes. Very annoying. Can someone see what's going on? Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #6: Fri Feb 7 17:32:10 GMT 2003 root@curdwarf:/usr/src/sys/i386/compile/bootable_dbg Preloaded elf kernel "/boot/kernel/kernel" at 0xc049a000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc049a0b4. Calibrating clock(s) ... TSC clock: 233259209 Hz, i8254 clock: 1193038 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 233288938 Hz CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67174400 (64 MB) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x004c1000 - 0x04007fff, 62156800 bytes (15175 pages) avail memory = 60289024 (57 MB) bios32: Found BIOS32 Service Directory header at 0xc00f8e20 bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc5f8 pnpbios: Found PnP BIOS data at 0xc00f8e30 pnpbios: Entry = f0000:90a8 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID c932f351 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug Initializing GEOMetry subsystem wlan: <802.11 Link Layer> null: <null device, zero device> mem: <memory & I/O> random: <entropy source> npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750 > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0438: *** Error: Looking up [\\_SB_.SBAT] in namespace, AE_NOT_FOUND ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 0, max = 2, width = 3 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 ACPI timer looks GOOD min = 0, max = 1, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179) Using $PIR table, 5 entries at 0xc00f8e80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.EIO_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0 \\_SB_.PCI0.EIO_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.17.0 \\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0 \\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.EIO_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0 \\_SB_.PCI0.EIO_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.17.0 \\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0 \\_SB_.PCI0.EIO_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1179, dev=0x0601, revid=0x2e bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa280, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base ffc00000, size 21, enabled map[18]: type 1, range 32, base ffb00000, size 20, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x01 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000ffe0, size 5, enabled found-> vendor=0x1179, dev=0x0701, revid=0x22 bus=0, slot=17, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 pci0: <display, VGA> at device 4.0 (no driver attached) pci0: <simple comms> at device 17.0 (no driver attached) pcib0: matched entry for 0.19.INTA (source \\_SB_.PCI0.EIO_.LNKA) pcib0: slot 19 INTA is routed to irq 11 pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 11 at device 19.0 on pci0 pcic0: PCI Memory allocated: 0x88000000 pcic0: PCI Configuration space: 0x00: 0x060f1179 0x04800003 0x06070020 0x00820000 0x10: 0x88000000 0x04800000 0x00141400 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x0420010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860011f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pccard0: <PC Card 16-bit bus (classic)> on pcic0 pcib0: matched entry for 0.19.INTB (source \\_SB_.PCI0.EIO_.LNKB) pcib0: slot 19 INTB is routed to irq 11 pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 11 at device 19.1 on pci0 pcic1: PCI Memory allocated: 0x88001000 pcic1: PCI Configuration space: 0x00: 0x060f1179 0x04800003 0x06070020 0x00820000 0x10: 0x88001000 0x04800000 0x00151500 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x0420020b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860021f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pccard1: <PC Card 16-bit bus (classic)> on pcic1 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x2001 0x2011 0x2011 0x2011 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lp0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) Device configuration finished. procfs registered Timecounters tick every 10.000 msec lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times Mounting root from ufs:/dev/ad0s3a setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot> c Mounting root from c Can't allocate root mount for filesystem 'c': 19 Root mount failed: 19 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot> panic: Root mount failed, startup aborted. syncing disks, buffers remaining... done Uptime: 18s Terminate ACPI pcic0: Autodetected 5.0V card pccard: card inserted, slot 0 pcic0: reset 1 int is 10 stat is ff Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. Rebooting... Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #6: Fri Feb 7 17:32:10 GMT 2003 root@curdwarf:/usr/src/sys/i386/compile/bootable_dbg Preloaded elf kernel "/boot/kernel/kernel" at 0xc0450000. Calibrating clock(s) ... TSC clock: 233260140 Hz, i8254 clock: 1193043 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 233288881 Hz CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67174400 (64 MB) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00477000 - 0x04007fff, 62459904 bytes (15249 pages) avail memory = 60596224 (57 MB) bios32: Found BIOS32 Service Directory header at 0xc00f8e20 bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc5f8 pnpbios: Found PnP BIOS data at 0xc00f8e30 pnpbios: Entry = f0000:90a8 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID c932f351 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug Initializing GEOMetry subsystem wlan: <802.11 Link Layer> random: <entropy source> null: <null device, zero device> mem: <memory & I/O> npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179) Using $PIR table, 5 entries at 0xc00f8e80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1179, dev=0x0601, revid=0x2e bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa280, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base ffc00000, size 21, enabled map[18]: type 1, range 32, base ffb00000, size 20, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x01 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000ffe0, size 5, enabled found-> vendor=0x1179, dev=0x0701, revid=0x22 bus=0, slot=17, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base fff00000, size 12, enabled found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 1, range 32, base fff01000, size 12, enabled found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 pci0: <display, VGA> at device 4.0 (no driver attached) pci0: <simple comms> at device 17.0 (no driver attached) pci_cfgintr_virgin: using routable interrupt 3 pci_cfgintr: 0:19 INTA routed to irq 3 pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> mem 0xfff00000-0xfff00fff irq 3 at device 19.0 on pci0 pcic0: PCI Configuration space: 0x00: 0x060f1179 0x04800007 0x06070020 0x00820000 0x10: 0xfff00000 0x04800000 0x00141400 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x04200103 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860011f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pccard0: <PC Card 16-bit bus (classic)> on pcic0 pci_cfgintr_search: linked (1) to configured irq 3 at 0:19:0 pci_cfgintr: 0:19 INTB routed to irq 3 pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> mem 0xfff01000-0xfff01fff irq 3 at device 19.1 on pci0 pcic1: PCI Configuration space: 0x00: 0x060f1179 0x04800007 0x06070020 0x00820000 0x10: 0xfff01000 0x04800000 0x00151500 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x04200203 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860021f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pccard1: <PC Card 16-bit bus (classic)> on pcic1 isa0: <ISA bus> on motherboard pnpbios: 16 devices, largest 195 bytes PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0x400ffff, size=0x3f10000 PNP0c01: adding fixed memory32 range 0x4010000-0x403ffff, size=0x30000 PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 PNP0c01: adding fixed memory32 range 0xfef80000-0xfeffffff, size=0x80000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1 PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1 PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 pnpbios: handle 3 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 8 device ID PNP0f13 (130fd041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1 PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1 PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1 PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1 PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1 PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1 PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 PNP0c02: adding io range 0x68-0x6f, size=0x8, align=0x1 PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1 PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1 PNP0c02: adding io range 0x18a0-0x18af, size=0x10, align=0x1 PNP0c02: adding io range 0x18b0-0x18bf, size=0x10, align=0x1 PNP0c02: adding io range 0x18c0-0x18cf, size=0x10, align=0x1 PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x100-0x107, size=0x8, align=0x1 PNP0c02: adding io range 0x10e-0x10e, size=0x1, align=0x1 pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1 PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1 PNP0600: adding irq mask 0x4000 pnpbios: handle 12 device ID PNP0600 (0006d041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 pnpbios: handle 14 device ID PNP0501 (0105d041) PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1 PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1 PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x8 pnpbios: handle 16 device ID PNP0401 (0104d041) pnpbios: handle 17 device ID PNP0a03 (030ad041) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 pnpbios: handle 20 device ID PNP0e03 (030ed041) YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1 YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1 YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1 YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1 YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1 YMH0021: adding irq mask 0x20 YMH0021: adding dma mask 0x2 YMH0021: adding dma mask 0x1 pnpbios: handle 22 device ID YMH0021 (2100a865) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lp0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x9 0x19 0x19 0x19 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x9 0x9 0x9 0x9 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices ****long wait**** unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 unknown: <PNP0600> can't assign resources (port) unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37a on isa0 unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0 unknown: <YMH0021> failed to probe at port 0x370-0x371,0x330-0x331,0x388-0x38f,0x530-0x537,0x220-0x22f irq 5 drq 0,1 on isa0 Device configuration finished. procfs registered Timecounters tick every 10.000 msec lo0: bpf attached pcic0: Event mask 0xe GEOM: new disk ad0 ar: FreeBSD check1 failed ad0: <TOSHIBA MK4309MAT/G5.01 D> ATA-4 disk at ata0-master ad0: 4126MB (8452080 sectors), 8944 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, BIOSPIO ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1/254/127 s:63 l:4144707 [1] f:00 typ:165 s(CHS):2/0/65 e(CHS):17/254/127 s:4144770 l:257040 [2] f:00 typ:165 s(CHS):18/0/65 e(CHS):4/254/191 s:4401810 l:3903795 [3] f:00 typ:1 s(CHS):5/0/129 e(CHS):14/29/191 s:8305605 l:146475 GEOM: Configure ad0s1, start 32256 length 2122089984 end 2122122239 GEOM: Configure ad0s2, start 2122122240 length 131604480 end 2253726719 GEOM: Configure ad0s3, start 2253726720 length 1998743040 end 4252469759 GEOM: Configure ad0s4, start 4252469760 length 74995200 end 4327464959 GEOM: Add ad0s1 hot[0] start 512 length 276 end 787 GEOM: Configure ad0s1a, start 0 length 2122089984 end 2122089983 GEOM: Configure ad0s1c, start 0 length 2122089984 end 2122089983 pcic0: Autodetected 5.0V card pccard: card inserted, slot 0 pcic0: reset 1 int is 10 stat is ff GEOM: Add ad0s2 hot[0] start 512 length 276 end 787 GEOM: Configure ad0s2c, start 0 length 131604480 end 131604479 GEOM: Add ad0s3 hot[0] start 512 length 276 end 787 GEOM: Configure ad0s3a, start 0 length 1998743040 end 1998743039 GEOM: Configure ad0s3c, start 0 length 1998743040 end 1998743039 GEOM: Add ad0s1a hot[0] start 512 length 276 end 787 GEOM: Add ad0s1c hot[0] start 512 length 276 end 787 GEOM: Add ad0s2c hot[0] start 512 length 276 end 787 GEOM: Add ad0s3a hot[0] start 512 length 276 end 787 GEOM: Add ad0s3c hot[0] start 512 length 276 end 787 Mounting root from ufs:/dev/ad0s3a Be nice to each other, mmmkay? start_init: trying /sbin/init pcic0: reset 1 int is 10 stat is ff pcic0: Autodetected 5.0V card pccard: card inserted, slot 0 pcic0: reset 2 int is 70 stat is cf pcic0: Event mask 0x8 pcic0: reset 3 int is 70 stat is ef pcic0: reset 0 lock order reversal 1st 0xc126d3f8 process lock (process lock) @ ../../../kern/kern_descrip.c:2104 2nd 0xc126c234 filedesc structure (filedesc structure) @ ../../../kern/kern_descrip.c:2111 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message