Thus spake Doug Barton ([EMAIL PROTECTED]) [03.03.13 13:27]: > Update your sources, and make sure that you have 1.202 of > sys/netinet/tcp_input.c. I had a 100% reproducable panic very similar to > yours, and hsu fixed it.
I'd like to verify, but using updated sources as of about four hours ago, I can't boot. My system hangs on mounting root: Mar 13 18:32:12 pegmatite kernel: Copyright (c) 1992-2003 The FreeBSD Project. Mar 13 18:32:12 pegmatite kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Mar 13 18:32:12 pegmatite kernel: The Regents of the University of California. All rights reserved. Mar 13 18:32:12 pegmatite kernel: FreeBSD 5.0-CURRENT #10: Thu Mar 13 16:50:44 EST 2003 Mar 13 18:32:12 pegmatite kernel: [EMAIL PROTECTED]:/usr/obj/usr/src/sys/pegmatite Mar 13 18:32:12 pegmatite kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc053f000. Mar 13 18:32:12 pegmatite kernel: Timecounter "i8254" frequency 1193182 Hz Mar 13 18:32:12 pegmatite kernel: Timecounter "TSC" frequency 733129806 Hz Mar 13 18:32:12 pegmatite kernel: CPU: Intel Pentium III (733.13-MHz 686-class CPU) Mar 13 18:32:12 pegmatite kernel: Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Mar 13 18:32:12 pegmatite kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Mar 13 18:32:12 pegmatite kernel: real memory = 1073659904 (1023 MB) Mar 13 18:32:12 pegmatite kernel: avail memory = 1037426688 (989 MB) Mar 13 18:32:12 pegmatite kernel: Allocating major#253 to "net" Mar 13 18:32:12 pegmatite kernel: Allocating major#252 to "pci" Mar 13 18:32:12 pegmatite kernel: netsmb_dev: loaded Mar 13 18:32:12 pegmatite kernel: Pentium Pro MTRR support enabled Mar 13 18:32:12 pegmatite kernel: acpi0: <ASUS CUV4X_EA> on motherboard Mar 13 18:32:12 pegmatite kernel: ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 Mar 13 18:32:12 pegmatite kernel: pcibios: BIOS version 2.10 Mar 13 18:32:12 pegmatite kernel: Using $PIR table, 9 entries at 0xc00f12d0 Mar 13 18:32:12 pegmatite kernel: acpi0: power button is handled as a fixed feature programming model. Mar 13 18:32:12 pegmatite kernel: Timecounter "ACPI-fast" frequency 3579545 Hz Mar 13 18:32:12 pegmatite kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 Mar 13 18:32:12 pegmatite kernel: acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 Mar 13 18:32:12 pegmatite kernel: acpi_button0: <Power Button> on acpi0 Mar 13 18:32:12 pegmatite kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Mar 13 18:32:12 pegmatite kernel: pci0: <ACPI PCI bus> on pcib0 Mar 13 18:32:12 pegmatite kernel: agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 Mar 13 18:32:12 pegmatite kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 Mar 13 18:32:12 pegmatite kernel: pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.AGP_ - AE_NOT_FOUND Mar 13 18:32:12 pegmatite kernel: pci1: <ACPI PCI bus> on pcib1 Mar 13 18:32:12 pegmatite kernel: pci1: <display, VGA> at device 0.0 (no driver attached) Mar 13 18:32:12 pegmatite kernel: isab0: <PCI-ISA bridge> at device 4.0 on pci0 Mar 13 18:32:12 pegmatite kernel: isa0: <ISA bus> on isab0 Mar 13 18:32:12 pegmatite kernel: atapci0: <VIA 82C686B UDMA100 controller> port 0xd800-0xd80f at device 4.1 on pci0 Mar 13 18:32:12 pegmatite kernel: ata0: at 0x1f0 irq 14 on atapci0 <snip> Mar 13 18:32:13 pegmatite kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Mar 13 18:32:13 pegmatite kernel: Timecounters tick every 1.000 msec Mar 13 18:32:13 pegmatite kernel: IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled Mar 13 18:32:13 pegmatite kernel: acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% Mar 13 18:32:13 pegmatite kernel: ad0: 38166MB <ST340016A> [77545/16/63] at ata0-slave UDMA100 Mar 13 18:32:13 pegmatite kernel: acd0: CDROM <FX4830T> at ata1-slave PIO4 Mar 13 18:32:13 pegmatite kernel: Mounting root from ufs:/dev/ad0s1a And there it just hangs. I know there were some changes to the ATA code recently, I'll take a closer look at them later. To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
