On Tue, Jun 03, 2003 at 12:02:20AM +0100, Paul Richards wrote:
> > > > fxp0: device timeout
> > > I get these as well. Is it on irq9 by any chance, along with acpi0 ?
> >
> > No. It's on irc 11 device 8 (as dmesg states). All irqs in bios are
> > set to 11 (factory default). ACPI is disabled.
>
> Ok, well that's a useful data point (for me anyway) since it means
> there's a problem with fxp losing interrupts that's not related to some
> other ACPI problems I've experienced, suggesting that it's therefore a
> fxp driver problem.
I have the same problem here with a freshly cvsupped 5.1-CURRENT.
The machine has two fxp-NICs and I get device timeouts with both of
them (with acpi enabled or disabled, both the same, no change). See
attached dmesg.
Markus
--
Why are they called buildings, when they're already
finished? Shouldn't they be called builts?
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #4: Tue Jun 10 12:55:22 CEST 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/MYKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ae000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 547179019 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (547.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1610612736 (1536 MB)
avail memory = 1561681920 (1489 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00fdf00
pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:12 INTA BIOS irq 11
pci_cfgintr: 0:12 INTA BIOS irq 11
pci_cfgintr: 0:14 INTA BIOS irq 10
pci_cfgintr: 0:18 INTD BIOS irq 10
agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on
pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 15.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 4.0 on pci2
pci3: <PCI bus> on pcib3
pci_cfgintr: 0:1 INTA routed to irq 3
pcib1: slot 15 INTB is routed to irq 3
pcib2: slot 4 INTB is routed to irq 3
pcib3: slot 5 INTA is routed to irq 3
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x3000-0x303f mem
0xf4200000-0xf42fffff,0xf4300000-0xf4300fff irq 3 at device 5.0 on pci3
fxp0: Ethernet address 00:d0:b7:20:97:72
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem
0xf4100000-0xf4100fff irq 11 at device 12.0 on pci0
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem
0xf4101000-0xf4101fff irq 11 at device 12.1 on pci0
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2800-0x283f mem
0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 10 at device 14.0 on pci0
fxp1: Ethernet address 00:90:27:6a:51:54
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x2860-0x286f at device 18.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2840-0x285f irq 10 at device
18.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 18.3 (no driver attached)
pci0: <display, VGA> at device 20.0 (no driver attached)
orm0: <Option ROMs> at iomem
0xce000-0xcefff,0xcd800-0xcdfff,0xc8000-0xcd7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept,
logging limited to 30 packets/entry by default
Waiting 15 seconds for SCSI devices to settle
ses0 at ahc0 bus 0 target 6 lun 0
ses0: <ESG-SHV SCA HSBP M10 0.04> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DNES-318350Y SA30> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
Mounting root from ufs:/dev/da0s1a
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
WARNING: driver "rtc" used unreserved major device number 202
WARNING: driver "vmmon" used unreserved major device number 200
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570+ $
/dev/vmmon: Module vmmon: initialized
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
