For the last few weeks I have difficulties building python2.3 with threads enabled.
Building using -lthr leaves python's thread related modules inoperable. Using -lkse builds ok, but in the python test suite test_signal.py hangs for ever. It seems that a SIGALRM is not caught. Until sometime last week the machine froze during this test. Today (CURRENT cvsuped 90 min ago) this test hangs but the machine does not freeze. However running other test programs seems to freeze the machine after a few minutes. I appended dmesg output, but right now I am just curious if there is anybody who has a working (threads enabled) python2.3 installation on CURRENT (SMP). - Till
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #6: Wed Jun 25 11:37:23 JST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERNEL Preloaded elf kernel "/boot/kernel/kernel" at 0xc04b2000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04b2294. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2392040564 Hz CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.04-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2146893824 (2047 MB) avail memory = 2084663296 (1988 MB) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000 io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80100 Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard pcibios: BIOS version 2.10 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz can't fetch resources for \\_SB_.PCI0.LPC0.SIO_.LPT_ - AE_AML_INVALID_RESOURCE_TYPE acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 IOAPIC #0 intpin 16 -> irq 2 IOAPIC #0 intpin 19 -> irq 5 IOAPIC #0 intpin 18 -> irq 10 IOAPIC #0 intpin 23 -> irq 11 agp0: <Intel Generic host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> mem 0xd4000000-0xd7ffffff at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2 pci4: <ACPI PCI bus> on pcib4 IOAPIC #2 intpin 0 -> irq 16 IOAPIC #2 intpin 4 -> irq 17 ti0: <Netgear GA620 1000baseT Gigabit Ethernet> mem 0xd0210000-0xd0213fff irq 16 at device 3.0 on pci4 ti0: Ethernet address: 00:a0:cc:73:49:65 bge0: <Broadcom BCM5702X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xd0200000-0xd020ffff irq 17 at device 4.0 on pci4 bge0: Ethernet address: 00:50:45:00:96:f7 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0: <serial bus, USB> at device 29.2 (no driver attached) pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 IOAPIC #0 intpin 21 -> irq 18 IOAPIC #0 intpin 22 -> irq 19 pci5: <serial bus, FireWire> at device 0.0 (no driver attached) pci5: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1460-0x146f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x378-0x37f on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x2f8-0x2ff irq 3 on acpi0 sio0: type 16550A sio1 port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata0-master UDMA100 acd0: DVD-R <HL-DT-ST DVDRAM GMA-4020B> at ata1-master PIO4 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Mounting root from ufs:/dev/ad0s1a uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1400-0x141f irq 2 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1420-0x143f irq 5 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1440-0x145f irq 10 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0000000-0xd00003ff irq 11 at device 29.7 on pci0 ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"