On Monday 11 August 2003 11:04 am, Joe Marcus Clarke wrote: > [EMAIL PROTECTED]:29:7: class=0x0c0320 card=0x015f1028 chip=0x24cd8086 > rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DB (ICH4) USB EHCI Controller' > class = serial bus > subclass = USB
I have the same hardware (0x24cd8086) on a Dell-branded board with the same results. I think so far only the NEC-based EHCI controllers are verified to work -- I don't know of anyone who has had success with the Intel ones. > I haven't tried applying the patch to get it detected as an actual Intel > controller, but I'm not sure that would help. It doesn't. It makes the probe message prettier but I get the same problem (unrecoverable error). If you have time, could you try compiling with "options USB_DEBUG" and setting the sysctl hw.usb.debug=3 and hw.usb.ehci.debug=6 ? Be warned that that will generate a LOT of debug output. Craig _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"