hi, i have a PQI Intelligent Stick 128MB USB flash drive that i'm trying to get working on -CURRENT.
i added: device da device scbus device umass to my kernel configuration. when i attach the drive, it detects it correctly, and i get the following kernel messages on the console: umass0: Intelligent Stick Intelligent Stick, rev 1.10/1.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB Card IntelligentStick 1.00> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 127MB (260448 512 byte sectors: 64H 32S/T 127C) umass0: Phase Error, residue = 0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 after the above is printed, it prints: Opened disk da0 -> 5 Opened disk da0 -> 5 Opened disk da0 -> 5 Opened disk da0 -> 5 4 times, and then it appears to give up. any attempt to mount /dev/da0s1 fails after a timeout of about 15-20 seconds or so. ash# mount -t msdos /dev/da0s1 /mnt/istick msdosfs: /dev/da0s1: Input/output error any ideas what to do to debug this? given pointers, i'm willing to play with some code. thanks! leon nb: please cc me on responses. _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"