Hi, since 3 weeks i've problems with my 5.1-CURRENT Box. When i try to delete very large direktories (for examplte the builddir of a make release) the box Panics.
panic: kmem_malloc(4096): kmem_map to small: 275251200 total allocated
cpuid=0: lapic.id = 00000000
boot() called on cpu#0
The Box hangs after that. no automatic reboot.
Regards
estartu
---- Bootmsg ----
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #1: Tue Sep 30 13:23:39 CEST 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/SOL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04f8000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04f826c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 4160684032 (3967 MB)
avail memory = 4048343040 (3860 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 9, version: 0x00178020, at 0xfec80000
io2 (APIC): apic id: 10, version: 0x00178020, at 0xfec80400
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00f2fb0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 18 -> irq 9
IOAPIC #0 intpin 17 -> irq 10
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib1
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci4: <ACPI PCI bus> on pcib2
IOAPIC #2 intpin 0 -> irq 11
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xd800-0xd83f mem
0xfe9e0000-0xfe9fffff irq 11 at device 1.0 on pci4
em0: Speed:N/A Duplex:N/A
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci3: <ACPI PCI bus> on pcib3
IOAPIC #1 intpin 4 -> irq 16
twe0: <3ware Storage Controller> port 0xc800-0xc80f mem
0xfe000000-0xfe7fffff,0xfe8ffc00-0xfe8ffc0f irq 16 at device 6.0 on pci3
twe0: 8 ports, Firmware FE7S 1.05.00.049, BIOS BE7X 1.08.00.046
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xe800-0xe81f irq 2 at
device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xb400-0xb43f mem
0xfd7a0000-0xfd7bffff,0xfd7fe000-0xfd7fefff irq 10 at device 1.0 on pci1
fxp0: Ethernet address 00:e0:81:26:9e:56
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <display, VGA> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7
irq 9 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
orm0: <Option ROMs> at iomem 0xc9800-0xcafff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM <ATAPI CD-ROM 52XMax> at ata0-master PIO4
GEOM: create disk ad2 dp=0xcab5e470
ad2: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata1-master UDMA100
twed0: <Unit 0, RAID5, Normal> on twe0
twed0: 351737MB (720359040 sectors)
GEOM: create disk twed0 dp=0xcadd008c
twe0: command interrupt
(probe0:ata0:0:0:0): Recovered Sense
(probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): ILLEGAL REQUEST asc:24,0
(probe0:ata0:0:0:0): Invalid field in CDB
(probe0:ata0:0:0:0): Recovered Sense
(probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): ILLEGAL REQUEST asc:24,0
(probe0:ata0:0:0:0): Invalid field in CDB
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
(cd0:ata0:0:0:0): Recovered Sense
(cd0:ata0:0:0:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): NOT READY asc:3a,0
(cd0:ata0:0:0:0): Medium not present
cd0 at ata0 bus 0 target 0 lun 0
cd0: <ATAPI CD-ROM 52XMax 1.20> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad2s1a
----------------------------------------------------------------------------
Gerhard Schmidt | Nick : estartu IRC : Estartu | PGP Public Key
Fischbachweg 3 | Privat: [EMAIL PROTECTED] | auf Anfrage/
86856 Hiltenfingen | Dienst: [EMAIL PROTECTED] | on request
Germany | |
pgp00000.pgp
Description: PGP signature
