cdrecord doesn't work with DVD's try dvdrecord instead
Pav Lucistnik wrote:
Hi people,
I borrowed a DVD writer for this weekend and I'm a bit dissapointed because I found that I'm not able to write anything in DAO mode. Writing fails in sending CUE sheet with burncd, and just before writing first data with cdrecord. I have -CURRENT from Friday night (17th Oct 2003). Blanking works fine, TAO writing works fine. Can anyone write CD in DAO mode on -CURRENT?
# burncd -vnd data data.bin adding type 0x08 file data.bin size 677280 KB 338640 blocks next writeable LBA 0 CUE sheet: 41 00 00 14 00 00 02 00 41 01 01 10 00 00 04 00 41 aa 01 14 00 4b 13 0f burncd: ioctl(CDRIOCSENDCUE): Input/output error
and syslog have this: acd0: FAILURE - SEND_CUE_SHEET status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED>
<nothing got written on a CD>
# cdrecord -dao data.bin
[snip]
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 7 of 661 MB written (fifo 70%) [buf 94%] 139.1x.
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 0E C6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
write track data: error after 7745536 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing time: 13.510s
Average write speed 831.9x.
Fixating...
cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 17.834s timeout 200s
Trouble flushing the cache
Fixating time: 17.835s
cdrecord: fifo had 186 puts and 123 gets.
cdrecord: fifo was 0 times empty and 1 times full, min fill was 65%.
<note that 7745536 is a size of burner's buffer. toc got written but no data, the CD is toasted>
# cdrdao write toc [snip] Writing track 01 (mode MODE1/MODE1 )... ?: Input/output error. : scsi sendcmd: retryable error CDB: 2A 00 00 00 0E DA 00 00 17 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.004s timeout 180s ERROR: Write data failed. ERROR: Writing failed - buffer under run?
<hangs in vmmaps state, toc written but no data, CD is toasted>
dmesg: acd0: DVDR <SONY DVD RW DRU-510A> at ata1-master PIO4 GEOM: create disk cd0 dp=0xc2d24600 cd0 at ata1 bus 0 target 0 lun 0 cd0: <SONY DVD RW DRU-510A 1.0d> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [145091 x 2048 byte records]
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
