Hello, I have one reproducable panic with sources from 04. Nov when enabling "device apic" in the kernel. While building OpenOffice about 1 1/2 hours after start the system reboots. This is absolutely reproducable. Removing device apic from the kernel solves the problem! The only thing I have are these lines from /var/log/messages: (attached the different dmesgs)
Nov 5 13:41:40 cale syslogd: kernel boot file is /boot/kernel/kernel Nov 5 13:41:40 cale kernel: instruction pointer = 0x8:0xc054c85d Nov 5 13:41:40 cale kernel: stack pointer = 0x10:0xcdc9dbe0 Nov 5 13:41:40 cale kernel: frame pointer = 0x10:0xcdc9dbe4 Nov 5 13:41:40 cale kernel: code segment = base 0x0, limit 0xfffff, type 0x1b Nov 5 13:41:40 cale kernel: = DPL 0, pres 1, def32 1, gran 1 Nov 5 13:41:40 cale kernel: processor eflags = interrupt enabled, IOPL = 0 Nov 5 13:41:40 cale kernel: current process = 26 (irq16: nvidia0) Nov 5 13:41:40 cale kernel: trap number = 30 Nov 5 13:41:40 cale kernel: panic: unknown/reserved trap Nov 5 13:41:40 cale kernel: Nov 5 13:41:40 cale kernel: syncing disks, buffers remaining... 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 Nov 5 13:41:40 cale kernel: giving up on 1022 buffers Nov 5 13:41:40 cale kernel: Uptime: 1h38m28s Nov 5 13:41:40 cale kernel: Shutting down ACPI Nov 5 13:41:40 cale kernel: stray irq9 Nov 5 13:41:40 cale kernel: Automatic reboot in 15 seconds - press a key on the console to abort Nov 5 13:41:40 cale kernel: Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #28: Tue Nov 4 22:18:02 CET 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/CALE Preloaded elf kernel "/boot/kernel/kernel" at 0xc09c1000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc09c1244. Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc09c12f0. ACPI APIC Table: <D815EA EA81510A> Timecounter "i8254" frequency 1183576 Hz quality 0 CPU: Intel(R) Celeron(TM) CPU 1100MHz (1095.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268173312 (255 MB) avail memory = 250781696 (239 MB) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Pentium Pro MTRR support enabled VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc07600e2 (1000022) VESA: NVIDIA acpi0: <D815EA D815EPFV> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f2a10 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci2: <PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 16 nvidia0: <GeForce4 MX 440 with AGP8X> mem 0xf0000000-0xf3ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci2 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib2 fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfc9ff000-0xfc9fffff irq 20 at device 8.0 on pci1 fxp0: Ethernet address 00:03:47:f0:c2:ef miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 19 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 17 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 23 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2 uhub2: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. uhub3: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 4 uhub3: 2 ports with 2 removable, bus powered pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 17 at device 31.5 on pci0 pcm0: <Analog Devices AD1885 AC97 Codec> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROMs> at iomem 0xd0800-0xd17ff,0xcf800-0xd07ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1095818846 Hz quality 800 Timecounters tick every 1.000 msec GEOM: create disk ad0 dp=0xc2d97570 ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100 acd0: CDROM <SONY CDU4811> at ata1-master PIO4 pcm0: measured ac97 link rate at 55928 Hz (probe2:ata1:0:0:0): Recovered Sense (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): CAM Status: SCSI Status Error (probe2:ata1:0:0:0): SCSI Status: Check Condition (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB (probe2:ata1:0:0:0): Recovered Sense (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): CAM Status: SCSI Status Error (probe2:ata1:0:0:0): SCSI Status: Check Condition (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB pass0 at ata1 bus 0 target 0 lun 0 pass0: <SONY CDU4811 PY0A> Removable CD-ROM SCSI-0 device pass0: 16.000MB/s transfers Mounting root from ufs:/dev/ad0s2a Warning: pid 565 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 571 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 572 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 602 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 603 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 604 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 605 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 608 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 607 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 616 used static ldt allocation. See the i386_set_ldt man page for more info
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #30: Thu Nov 6 00:10:38 CET 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/CALE Preloaded elf kernel "/boot/kernel/kernel" at 0xc0809000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0809244. Timecounter "i8254" frequency 1183579 Hz quality 0 CPU: Intel(R) Celeron(TM) CPU 1100MHz (1096.37-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268173312 (255 MB) avail memory = 250793984 (239 MB) Pentium Pro MTRR support enabled VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0758da2 (1000022) VESA: NVIDIA acpi0: <D815EA D815EPFV> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f2a10 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 31 INTD is routed to irq 7 pcib0: slot 31 INTB is routed to irq 9 pcib0: slot 31 INTC is routed to irq 10 pcib0: slot 31 INTB is routed to irq 9 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci2: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci2: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib2 pcib2: slot 8 INTA is routed to irq 11 fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfc9ff000-0xfc9fffff irq 11 at device 8.0 on pci1 fxp0: Ethernet address 00:03:47:f0:c2:ef miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 7 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 9 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 10 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2 uhub2: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. uhub3: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 4 uhub3: 2 ports with 2 removable, bus powered pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0 pcm0: <Analog Devices AD1885 AC97 Codec> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROMs> at iomem 0xd0800-0xd17ff,0xcf800-0xd07ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1096367008 Hz quality 800 Timecounters tick every 1.000 msec GEOM: create disk ad0 dp=0xc2e05570 ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100 acd0: CDROM <SONY CDU4811> at ata1-master PIO4 pcm0: measured ac97 link rate at 55934 Hz Mounting root from ufs:/dev/ad0s2a Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks, buffers remaining... 12 12 2 2 done Uptime: 50s Shutting down ACPI Rebooting... Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #30: Thu Nov 6 00:10:38 CET 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/CALE Preloaded elf kernel "/boot/kernel/kernel" at 0xc09b8000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc09b8244. Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc09b82f0. Timecounter "i8254" frequency 1183574 Hz quality 0 CPU: Intel(R) Celeron(TM) CPU 1100MHz (1095.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268173312 (255 MB) avail memory = 250781696 (239 MB) Pentium Pro MTRR support enabled VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0758da2 (1000022) VESA: NVIDIA acpi0: <D815EA D815EPFV> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f2a10 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 31 INTD is routed to irq 7 pcib0: slot 31 INTB is routed to irq 9 pcib0: slot 31 INTC is routed to irq 10 pcib0: slot 31 INTB is routed to irq 9 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci2: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 nvidia0: <GeForce4 MX 440 with AGP8X> mem 0xf0000000-0xf3ffffff,0xfd000000-0xfdffffff irq 11 at device 0.0 on pci2 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib2 pcib2: slot 8 INTA is routed to irq 11 fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfc9ff000-0xfc9fffff irq 11 at device 8.0 on pci1 fxp0: Ethernet address 00:03:47:f0:c2:ef miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 7 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 9 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 10 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2 uhub2: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. uhub3: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 4 uhub3: 2 ports with 2 removable, bus powered pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0 pcm0: <Analog Devices AD1885 AC97 Codec> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROMs> at iomem 0xd0800-0xd17ff,0xcf800-0xd07ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1095816271 Hz quality 800 Timecounters tick every 1.000 msec GEOM: create disk ad0 dp=0xc2e0a770 ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100 acd0: CDROM <SONY CDU4811> at ata1-master PIO4 pcm0: measured ac97 link rate at 55942 Hz Mounting root from ufs:/dev/ad0s2a Warning: pid 557 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 563 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 564 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 584 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 585 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 586 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 587 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 590 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 589 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 594 used static ldt allocation. See the i386_set_ldt man page for more info
pgp00000.pgp
Description: signature