> > 
> > Upgrading a Asus P2L97-DS dual Pentium II 266MHz box, I got this panic
> > when booting:
> > 
> >############################
> > Console: serial port
> > BIOS drive A: is disk0
> > BIOS drive C: is disk1
> > BIOS drive D: is disk2
> > BIOS drive E: is disk3
> > BIOS 640kB/130036kB available memory
> > 
> > FreeBSD/i386 bootstrap loader, Revision 1.1
> > ([EMAIL PROTECTED], Sun Nov  2 14:16:55 SAST 2003)
> > Loading /boot/defaults/loader.conf 
> > /boot/kernel/kernel text=0x23372c data=0x27fcc+0x47494 
> > syms=[0x4+0x31690+0x4+0x3de08]
> > /boot/kernel/if_vlan.ko text=0x22b0 data=0x1d8+0x5c syms=[0x4+0x620+0x4+0x573]
> > /boot/kernel/if_fxp.ko text=0x77c0 data=0xfd4+0xc syms=[0x4+0xc50+0x4+0xceb]
> > loading required module 'miibus'
> > /boot/kernel/miibus.ko text=0x15940 data=0xc84+0x68 syms=[0x4+0x1a90+0x4+0x2240]
> > /boot/kernel/usb.ko text=0x201e8 data=0xb4c+0x148 syms=[0x4+0x2ad0+0x4+0x30bb]
> > 
> > Hit [Enter] to boot immediately, or any other key for command prompt.
> > Booting [/boot/kernel/kernel]...               
> > Copyright (c) 1992-2003 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >         The Regents of the University of California. All rights reserved.
> > FreeBSD 5.1-CURRENT #50: Mon Nov 10 17:51:13 SAST 2003
> >     [EMAIL PROTECTED]:/b/src/sys/i386/compile/BEAST
> > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0768000.
> > Preloaded elf module "/boot/kernel/if_vlan.ko" at 0xc076821c.
> > Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc07682c8.
> > Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0768374.
> > Preloaded elf module "/boot/kernel/usb.ko" at 0xc0768420.
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU)
> >   Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
> >   
> > Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
> > real memory  = 134205440 (127 MB)
> > avail memory = 125018112 (119 MB)
> > MPTable: <OEM00000 PROD00000000>
> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> >  cpu0 (BSP): APIC ID:  1
> >  cpu1 (AP): APIC ID:  0
> > ioapic0: Assuming intbase of 0
> > ioapic0 <Version 1.1> irqs 0-23 on motherboard
> > Pentium Pro MTRR support enabled
> > acpi0: <ASUS   P2L97-DS> on motherboard
> > pcibios: BIOS version 2.10
> > Using $PIR table, 7 entries at 0xc00f0d20
> > acpi0: Power Button (fixed)
> > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
> > acpi_cpu0: <CPU> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pcib0: slot 4 INTD is routed to irq 5
> > pcib0: slot 6 INTA is routed to irq 5
> > pcib0: slot 10 INTA is routed to irq 12
> > pcib0: slot 11 INTA is routed to irq 10
> > pcib0: slot 12 INTA is routed to irq 11
> > panic: probing for non-PCI bus
> > cpuid = 0; 
> > Uptime: 1s
> > Shutting down ACPI
> > Automatic reboot in 15 seconds - press a key on the console to abort
> > Rebooting...
> >############################
> 
> Can you provide a copy of your mptable?

Yes, here is the output of "mptable -verbose" on a kernel built on Nov 3.

John
-- 
John Hay -- [EMAIL PROTECTED] / [EMAIL PROTECTED]


===============================================================================

MPTable, version 2.0.15

 looking for EBDA pointer @ 0x040e, NOT found
 searching CMOS 'top of mem' @ 0x0009fc00 (639K)
 searching BIOS @ 0x000f0000

 MP FPS found in BIOS @ physical addr: 0x000f6e30

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:                     BIOS
  physical address:             0x000f6e30
  signature:                    '_MP_'
  length:                       16 bytes
  version:                      1.4
  checksum:                     0x05
  mode:                         Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:             0x000f6a22
  signature:                    'PCMP'
  base table length:            252
  version:                      1.4
  checksum:                     0xf9
  OEM ID:                       'OEM00000'
  Product ID:                   'PROD00000000'
  OEM table pointer:            0x00000000
  OEM table size:               0
  entry count:                  23
  local APIC address:           0xfee00000
  extended table length:        124
  extended table checksum:      179

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:     APIC ID Version State           Family  Model   Step    Flags
                 1       0x11    BSP, usable     6       3       3       0x80fbff
                 0       0x11    AP, usable      6       3       3       0x80fbff
--
Bus:            Bus ID  Type
                 0       PCI   
                 1       ISA   
--
I/O APICs:      APIC ID Version State           Address
                 2       0x11    usable          0xfec00000
--
I/O Ints:       Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
                ExtINT   conforms    conforms        1     0          2    0
                INT      conforms    conforms        1     1          2    1
                INT      conforms    conforms        1     0          2    2
                INT      conforms    conforms        1     3          2    3
                INT      conforms    conforms        1     4          2    4
                INT      conforms    conforms        1     6          2    6
                INT      conforms    conforms        1     7          2    7
                INT      conforms    conforms        1     8          2    8
                INT      conforms    conforms        1     9          2    9
                INT      conforms    conforms        1    14          2   14
                INT      conforms    conforms        1    15          2   15
                INT     active-lo       level        0   4:D          2   19
                INT     active-lo       level        0   6:A          2   19
                INT     active-lo       level        0  10:A          2   18
                INT     active-lo       level        0  11:A          2   17
                INT     active-lo       level        0  12:A          2   16
--
Local Ints:     Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
                ExtINT  active-hi        edge        1     0        255    0
                NMI     active-hi        edge        1     0        255    1

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0x10000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0x8000000
 address range: 0xd9ef0000
--
System Address Space
 bus ID: 0 address type: prefetch address
 address base: 0xe1ef0000
 address range: 0x6110000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xe8000000
 address range: 0x18000000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xa0000
 address range: 0x20000
--
Bus Heirarchy
 bus ID: 1 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000001

===============================================================================

_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to