Damn, I've forgotten to include `dmesg` output. Attached.
-- be9
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Mon Nov 10 20:39:27 NOVT 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/BECHO Preloaded elf kernel "/boot/kernel/kernel" at 0xc07f5000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) processor (1003.40-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> real memory = 402587648 (383 MB) avail memory = 385548288 (367 MB) Pentium Pro MTRR support enabled acpi0: <VIA694 AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fdca0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 9 INTA is routed to irq 12 pcib0: slot 10 INTA is routed to irq 5 pcib0: slot 11 INTA is routed to irq 11 pcib0: slot 17 INTD is routed to irq 11 pcib0: slot 17 INTD is routed to irq 11 pcib0: slot 17 INTD is routed to irq 11 pcib0: slot 17 INTC is routed to irq 5 agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 10 pcib1: slot 0 INTA is routed to irq 10 pci1: <display, VGA> at device 0.0 (no driver attached) sio0: <3COM PCI FaxModem> port 0xa000-0xa007 irq 12 at device 9.0 on pci0 sio0: moving to sio4 sio4: type 16550A xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xe3000000-0xe300007f irq 5 at device 10.0 on pci0 xl0: Ethernet address: 00:a0:24:53:63:96 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xe3001000-0xe300107f irq 11 at device 11.0 on pci0 xl1: Ethernet address: 00:a0:24:53:f4:fd miibus1: <MII bus> on xl1 xlphy1: <3Com internal media interface> on miibus1 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8233 UDMA100 controller> port 0xac00-0xac0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 11 at device 17.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 11 at device 17.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub1: port error, restarting port 1 uhub1: port error, giving up port 1 uhci2: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 17.4 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcm0: <VIA VT8233 (pre)> port 0xbc00-0xbcff irq 5 at device 17.5 on pci0 pcm0: <Avance Logic ALC200 AC97 Codec> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1003399454 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% GEOM: create disk ad0 dp=0xc372e570 ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA100 acd0: CDROM <CD-540E> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 124 files 1 WARNING: /var was not properly dismounted drm0: <ATI Radeon QY RV100 7000/VE> port 0x9000-0x90ff mem 0xe1000000-0xe100ffff,0xd8000000-0xdfffffff irq 10 at device 0.0 on pci1 info: [drm] AGP at 0xd0000000 128MB info: [drm] Initialized radeon 1.9.0 20020828 on minor 0 drm0: [MPSAFE] cd9660: Joliet Extension (Level 3) drm0: [MPSAFE]
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"