27.04.2010 16:54, Alex Keda пишет:
27.04.2010 16:35, Andrey Chernov пишет:
See subj.
They appears to work for ~10 minutes then all hangs deadly. No one TCP
service responds, but ICMP and UDP goes normally.
The machine is x86 Pentium 4 IPv4-only, IPv6 is turned off in every place.
Last kernel I have that works nice compiled at Mar 19.

Ethernet info:
fxp0:<Intel 82559 Pro/100 Ethernet>  port 0xc000-0xc03f mem
0xed100000-0xed100fff,0xed000000-0xed0fffff irq 11 at device 11.0 on pci1
miibus0:<MII bus>  on fxp0
inphy0:<i82555 10/100 media interface>  PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

This is remote machine, so I don't have console access.

I too have it bug
but, time > 2-3 hours.
lissyara$ ifconfig
bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c0098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
ether 00:1c:c4:98:77:a8
inet 172.17.4.127 netmask 0xffffff00 broadcast 172.17.4.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80000<LINKSTATE>
ether 00:bd:3c:81:00:00
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 42:16:df:e5:3c:68
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 3 priority 128 path cost 2000000
member: bge0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 55
gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1280
tunnel inet 172.17.4.127 --> 172.29.200.25
inet 10.10.20.26 --> 10.10.10.16 netmask 0xffffffff
options=1<ACCEPT_REV_ETHIP_VER>
lissyara$

_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

forget. if I attempt local login to machine, I can type "root", Enter - and finish - cursor get to line down and nothing. (root without password)
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Reply via email to