On Sun, May 23, 2010 at 01:35:48PM -0700, Heshmat Ismail wrote:
> Hi all,
Hi!
> I have built and installed a custom kernel on a freebsd 8.0-RELEASE machine
> (host os),then i installed qemu from the packages and used the following
> commands:-
> # qemu-img create -f qcow2 freebsd.image 10G
> # qemu -m 256 -hda freebsd.image -cdrom /dev/acd0 -boot d
> # qemu freebsd.image
> So, the guest os is the same as the host os and i installed it from the same
> DVD (freebsd 8.0-RELEASE).
> I face two problems with the guest os (the host os is working fine):-
> Problem#1
> When i try to install any packages from the DVD by running
> # sysinstall
> =>configure=>packages=>Install from freebsd CD/DVD
> i got : Error mounting /dev/acd0 on /dist: Input/output error (5).
> Problem#2
> I put these lines in /etc/rc.conf:
> hald_enable="YES"
> dbus_enable="YES"
> ifconfig_ed0="DHCP"
> but i can not connect to the internet (the above configuration in the host os
> works fine).When i use the GENERIC kernel i get no problems.Here are the
> differences between the two kernels,the GENERIC and MYKERNEL.
>
>
> # cd /usr/src/sys/i386/conf
> # diff -u GENERIC MYKERNEL
> -options
> CD9660 # ISO 9660 Filesystem
> +#options CD9660 # ISO 9660 Filesystem
> -device ed # NE[12]000, SMC Ultra, 3c503, DS8390
> +#device ed # NE[12]000, SMC Ultra, 3c503, DS8390
> cards
Well you disabled the ISO 9660 fs which explains your Problem#1 and the
ed(4) device which explains your Problem#2.
And btw, these days there's usually not much point in removing usused
drivers from your kernel, it won't boot noticeably faster and the amount
of ram/diskspace saved is only relevant in (some) embedded setups. So all
that's left is another opportunity to shoot yourself in the foot... :)
HTH,
Juergen
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-emulation
To unsubscribe, send any mail to "[email protected]"
