'k, don't know what I did the first time, but seemed to work fine this time … thx …
On 2011-09-30, at 1:53 AM, Bernhard Froehlich wrote: > On Thu, 29 Sep 2011 20:29:57 -0400, Hub- FreeBSD wrote: >> First, I've searched google hi+low, and this is still eluding me … >> >> I've got a FreeBSD 8-STABLE box that is up to date as of yesterday … >> VirtualBox installed great, I got through the docs on how to create a >> Headless VM, it boots, FreeBSD 8 ISO installed on it, everything works >> great "stand alone" … but I can't get the network to work. >> >> Host Machine, ethernet looks like: >> >> ganymede# ifconfig -a >> ale0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> >> options=c319a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MCAST,WOL_MAGIC,VLAN_HWTSO,LINKSTATE> >> ether 00:22:15:f1:bc:c5 >> inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 >> media: Ethernet 100baseTX <full-duplex> >> status: active >> pflog0: flags=0<> metric 0 mtu 33200 >> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >> options=3<RXCSUM,TXCSUM> >> inet 127.0.0.1 netmask 0xff000000 >> vboxnet0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> ether 0a:00:27:00:00:00 >> ganymede# >> >> >> showvminfo for the VM shows NIC 1 as : >> >> NIC 1: MAC: 080027F9E7B2, Attachment: Bridged Interface >> 'vboxnet0', Cable connected: on, Trace: off (file: none), Type: >> 82540EM, Reported speed: 0 Mbps, Boot priority: 0 >> >> A cut-n-paste of ifconfig in the VPS is attached below... >> >> >> >> Yes, I can't ping anywhere … >> >> I tried to set the bridged device to the ale0 device, which allows me >> to ping everywhere *except* the host server … so I'm missing a step >> here … >> >> I've read through http://wiki.freebsd.org/VirtualBox several times … >> >> The steps i used to create the remote headless were found: >> >> http://www.virtualbox.org/manual/ch07.html >> >> So I figure either I'm bridging to the wrong device. or I missing a >> configuration step on the Host side of things … but I can't seem to >> find anywhere where someone has asked that and gotten an answer and/or >> that it is documented … everything seems to point to using the GUI, >> which, in this environment, I don' t have access to … >> >> >> So far, though, getting VirtualBox up and running has been fantastic > > I guess you just used the wrong device that you attached to. When > configuring bridging via QT GUI and using bge0 I get: > > NIC 1: MAC: 080027289A85, Attachment: Bridged Interface > 'bge0', Cable connected: on, Trace: off (file: none), Type: 82540EM, > Reported speed: 0 Mbps, Boot priority: 0 > > > -- > Bernhard Fröhlich > http://www.bluelife.at/ > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-emulation > To unsubscribe, send any mail to "[email protected]" _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-emulation To unsubscribe, send any mail to "[email protected]"
