Am 2016-10-15 um 13:22 schrieb Fabian Keil:
Michael Osipov <> wrote:

Am 2016-10-14 um 11:43 schrieb Fabian Keil:
Michael Osipov <> wrote:

Am 2016-10-13 um 03:41 schrieb John-Mark Gurney:
Michael Osipov wrote this message on Wed, Oct 12, 2016 at 20:54
As if there is a bottleneck between socket read and geom write to

Is that better?

Have you run gstat on the system to see if there is an IO bottle
neck?  Since you are using graid3, you want to look to see if
it's %busy is ~100, while the underlying components are not.

This is hardly impossible because as soon as I start some SFTP
transfer, all of my SSH sessions free or receive connetion
timeout/abort.  Doing a SFTP from FreeBSD to FreeBSD gives me on both
physical disks and RAID3 volume a busy of zero to one perfect. In
other terms, the drives are bored.

Try checking the FAIL and SLEEP columns in the "vmstat -z" output.

I assume that you expect a rise on those numbers. I have made several
runs. Rebooted the machine and then started SFTP transfer. After seconds
my SSH sessions locked up. The transfer was aborted manually after 10
minutes which should have saturated the entire connection. After that, I
reran vmstat -z, no or minimal rise in FAIL and SLEEP.

IIRC the SLEEP column only showns currently sleeping requests,
therefore you may want to run "vmstat -z" multiple times while
the transfer is ongoing. Having said that, a custom DTrace script
would probably be a better tool to diagnose the issue anyway.

Ah ok, I need to switch physically to that machine because SSH is not possible. I don't mind to read the DTrace tutorial but what exactly should I trace? sshd?

Interesting to say that this happens if is is a UFS volume on
gconcat/graid3/gvinum/gstripe configuration. Regular gpart with GPT has
no performance penalty. Additionally, it is not limited to SSH but
virtually everything with sockets: nc, ggate, smb.

This could be related to:

It pretty much sounds like it, though I do not use ipfw, pf or any NAT
stuff. I will try your first patch and let you know.

Do you want me to add my usecase to the issue?

If the patch helps, that could be useful once a committer
finds the time to look at the PR.

I will switch from 11.0-RELEASE to 11.0-STABLE via Subversion first, rebuild world and kernel and then apply your patches. Hand on.


_______________________________________________ mailing list
To unsubscribe, send any mail to ""

Reply via email to