On Mon, 14 Aug 2000, Kazennov Vladimir wrote:
> Hello ALL!
> Please, give me some info about support adaptec 29160 with FreeBSD
> Kernel during installation doesn't recognise this adapter
Works fine for me, just using the ahc driver (endless thanks to Justin
Gibbs!)
I have a dualbussed 7895 controller on my motherboard, so the 29160
became my ahc2. I only have one of the my drives up yet, but my hints
file looks like:
hint.da.3.at="scbus2"
hint.da.3.target="0"
hint.da.4.at="scbus2"
hint.da.4.target="1"
(scbus0 & 1 already used up with the 7895). The config file just needs
the single "device ahc", no count required. The dmesg so far (with only
one of my two drives up):
ahc2: <Adaptec 29160 Ultra160 SCSI adapter> port 0xf000-0xf0ff mem
0xfecfd000-0x
da3 at ahc2 bus 0 target 6 lun 0
da3: <IBM DDYS-T18350N S80D> Fixed Direct Access SCSI-3 device
da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da3: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
Bonnie tells me:
-------Sequential Output-------- ---Sequential Input-- --Random--
-Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
Machine MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec %CPU
100 16798 98.2 27256 63.6 10974 35.3 15611 99.2 29266 45.0 366.9 7.3
----------------------------------------------------------------------------
Chuck Robey | Interests include C & Java programming, FreeBSD,
[EMAIL PROTECTED]| electronics, communications, and signal processing.
New Year's Resolution: I will not sphroxify gullible people into looking up
fictitious words in the dictionary.
----------------------------------------------------------------------------
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
