On Monday, 28 August 2000 at 22:28:29 -0400, Christopher Stein wrote:
>
> Hello,
>
> I have been trying to connect to a remote gdb debug session via a serial
> port (null modem cable) and can't seem to get the device right. I've tried
> the devices:
>
> /dev/ttyd*
> /dev/cuaa0 (as suggested by the freebsd handbook).
>
> hhmmm.. any suggestions? /dev/ttyd1 worked for a 3.3/4.0-pre install in
> the past, but doesn't work for this new system, which is quite similar.
Nothing has changed between 4.0 and now. I've had the devil's own job
in the past, and I suspect you've hit a different problem. Do you
have a breakout box on the line? If so, what's it showing? Also,
you've set the sio flags correctly (0x80 or 0x90) on the debugged
machine, right?
Greg
--
Finger [EMAIL PROTECTED] for PGP public key
See complete headers for address and phone numbers
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
