----- Original Message -----
From: "Daniel O'Connor"
On 21/02/2013, at 9:06, "Steven Hartland" <kill...@multiplay.co.uk> wrote:
If I change the console redirect to com1, my screen stays blank. Would
you perhaps know how to use com1 for redirect and connect to it using
ipmi-console (or ipmi-tool)?
We use the following on Supermicro servers works fine:-
http://blog.multiplay.co.uk/2012/12/freebsd-serial-over-lan/
Nice!
BTW do you know what flag 0x20 does for UART? 0x10 is documented but 0x20 is
not.
I had a quick look at the code and AFAIK it doesn't do anything (on 9.1 anyway).
Actually at a guess I would say it's a hangover from sio(4) where 0x20 forced
the
device in question to be the console.
According to the handbook, where I got the settings from, 0x20:
"Forces this unit to be the console (unless there is another higher priority
console),
regardless of the -h option discussed below. The flag 0x20 must be used
together with
the 0x10 flag."
Regards
Steve
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it.
In the event of misdirection, illegible or incomplete transmission please
telephone +44 845 868 1337
or return the E.mail to postmas...@multiplay.co.uk.
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
