It seems [EMAIL PROTECTED] wrote:
Thanks for hunting this down! I have a semilar but differently
implemented change for another problematic drive that I'll
commit soon, I think that will help this too now that we
know whats wrong...
>
> I recently acquired a new Yamaha 2100E ATAPI CDRW drive, and encountered
> this error during the fixation stage with burncd on a FreeBSD 4.3 release
> system:
>
> burncd: ioctl(CDRIOCCLOSEDISK): Input/output error
>
> and the kernel complains:
>
> acd0: MODE_SELECT_BIG - ILLEGAL REQUEST asc=1a ascq=00 error=00
>
> After perusing the ATA/ATAPI-5 and MMC-3 specifications I realized that the
> asc=1a error (PARAMETER LENGTH LIST ERROR) was telling me that the CDRW
> drive wasn't happy with the length of the CLOSE DISK mode page that was
> being sent to it.
>
> In atapi-cd.c the acd_close_disk() function is sending the write_param
> mode page structure in the CLOSE DISK command to the drive.
>
> Upon examination of struct write_param in atapi-cd.h I noticed sure enough
> the last four bytes of the page were commented out:
> /*
> u_int8_t vendor_specific_byte0;
> u_int8_t vendor_specific_byte1;
> u_int8_t vendor_specific_byte2;
> u_int8_t vendor_specific_byte3;
> */
>
> I uncommented these lines, recompiled/rebooted, and tried burncd again.
> This time it failed right away on the CDRIOCOPENDISK ioctl, with the kernel
> error being something about an invalid parameter.
>
> So I reverted struct write_param back to the original commented version.
> But I copied write_param to a new struct called full_write_param and
> uncommented the last 4 bytes. I then changed acd_close_disk() to use the
> full_write_param struct rather than the original write_param struct.
>
> Recompiled/rebooted.
>
> The result: success!
>
> The Yamaha 2100E doesn't want the last 4 bytes in the mode page for OPEN
> DISK but does for CLOSE DISK.
>
> Here's a cvs diff off the FreeBSD 4.3 release files:
>
> Index: atapi-cd.h
> ===================================================================
> RCS file: /d1/FreeBSD/FreeBSD_CVS/src/sys/dev/ata/atapi-cd.h,v
> retrieving revision 1.15.2.6
> diff -r1.15.2.6 atapi-cd.h
> 269a270,338
> > /*
> > CDROM Write Parameters Mode Page (Burners ONLY)
> > Contains the last 4 vendor specific bytes.
> > */
> > struct full_write_param {
> > /* mode page data header */
> > u_int16_t data_length;
> > u_int8_t medium_type;
> > u_int8_t dev_spec;
> > u_int8_t unused[2];
> > u_int16_t blk_desc_len;
> >
> > /* write parameters page */
> > u_int8_t page_code;
> > #define ATAPI_CDROM_WRITE_PARAMETERS_PAGE 0x05
> >
> > u_int8_t page_length; /* 0x32 */
> > u_int8_t write_type :4; /* write stream type */
> > #define CDR_WTYPE_PACKET 0x00
> > #define CDR_WTYPE_TRACK 0x01
> > #define CDR_WTYPE_SESSION 0x02
> > #define CDR_WTYPE_RAW 0x03
> >
> > u_int8_t test_write :1; /* test write enable */
> > u_int8_t reserved2_5 :1;
> > u_int8_t burnproof :1; /* BurnProof enable */
> > u_int8_t reserved2_7 :1;
> > u_int8_t track_mode :4; /* track mode */
> > #define CDR_TMODE_AUDIO 0x00
> > #define CDR_TMODE_AUDIO_PREEMP 0x01
> > #define CDR_TMODE_ALLOW_COPY 0x02
> > #define CDR_TMODE_DATA 0x04
> > #define CDR_TMODE_QUAD_AUDIO 0x08
> >
> > u_int8_t copy :1; /* generation stamp */
> > u_int8_t fp :1; /* fixed packet type */
> > u_int8_t session_type :2; /* session type */
> > #define CDR_SESS_NONE 0x00
> > #define CDR_SESS_FINAL 0x01
> > #define CDR_SESS_RESERVED 0x02
> > #define CDR_SESS_MULTI 0x03
> >
> > u_int8_t datablock_type :4; /* data type code (see cdrio.h) */
> > u_int8_t reserved4_4567 :4;
> > u_int8_t reserved5;
> > u_int8_t reserved6;
> > u_int8_t host_app_code :6; /* host application code */
> > u_int8_t reserved7_67 :2;
> > u_int8_t session_format; /* session format */
> > #define CDR_SESS_CDROM 0x00
> > #define CDR_SESS_CDI 0x10
> > #define CDR_SESS_CDROM_XA 0x20
> >
> > u_int8_t reserved9;
> > u_int32_t packet_size; /* packet size in bytes */
> > u_int16_t audio_pause_length; /* audio pause length in secs */
> > u_int8_t media_catalog_number[16];
> > u_int8_t isr_code[16];
> > u_int8_t sub_hdr_byte0;
> > u_int8_t sub_hdr_byte1;
> > u_int8_t sub_hdr_byte2;
> > u_int8_t sub_hdr_byte3;
> >
> > u_int8_t vendor_specific_byte0;
> > u_int8_t vendor_specific_byte1;
> > u_int8_t vendor_specific_byte2;
> > u_int8_t vendor_specific_byte3;
> > } __attribute__((packed));
> >
> Index: atapi-cd.c
> ===================================================================
> RCS file: /d1/FreeBSD/FreeBSD_CVS/src/sys/dev/ata/atapi-cd.c,v
> retrieving revision 1.48.2.10
> diff -r1.48.2.10 atapi-cd.c
> 1371c1371
> < struct write_param param;
> ---
> > struct full_write_param param;
>
>
> --
> Brian Koehmstedt
> [EMAIL PROTECTED]
>
-S�ren
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
