On Fri, Dec 28, 2001 at 11:12:40PM +0100, S�ren Schmidt wrote:
> It seems Glenn Johnson wrote:
>
> > I have had this exact problem. I have an Epox 8KTA board with a
> > 1GHz Athlon (Thunderbird) with 256MB of PC-133 memory. I would
> > consistently get random errors, usually during a compilation, using
> > the default BIOS settings. After fiddling with some of the BIOS
> > options, such as enabling PCI burst, the system runs pretty stable.
> > However, occasionally I will get that freeze that you refer to
> > during a buildworld. As far as I can tell though if I set the
> > memory clock to 100MHz the problem goes away completely, or at least
> > I have not observed it happen yet.
>
> I have a 8kta3+ here that has problems with some of the PC133 512Mb
> modules I got cheaply earlier this year, the problem was solved when
> I swithed of "page mode" in the BIOS, it then runs 100% stable even
> overclocked at 145Mhz and CAS2 which the modules shouldn't even
> support.
Thanks, I will give that a try.
> > It is really hard for me to say if this is FreeBSD specific because
> > I do not tend to stress the system much when I have Linux running.
> > My wife has an identical system running Windows 98SE and she has no
> > problems but I know that I have installed software from Epox that
> > specifically addresses some issues with the VIA chipset so that may
> > be why.
> >
> From what I can tell the newest Epox BIOS for the 8kta3 does *not*
>
> install the 686b fix when it doesn't detect a SBLive! sound card, nice
> but not good enough :/
Yes, that seems to be the case. I just checked the Epox Web site and
the BIOS revision of 04/17/2001 for the 8KTA has the following bullet
point:
* Fixed VIA KT133/A/E + 686B issue copying large sized files on
* E/IDE devices with a SB Live sound card installed.
No further mention of the issue is made for later BIOS revisions.
For the software I referred to above, I was referring to Windows
software that includes fixes for the OS drivers. They call it VIA
Apollo 4-in-1 (a.k.a. VIA ServicePack). I am not really up on Windows
behavior but my impression was that this software was necessary to
enable UDMA.
--
Glenn Johnson
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
