the # of cpus dos not change when enabling/disabling hyperthread,
4.6 only sees 2.
mptable:
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f6670
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x68
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009bf70
signature: 'PCMP'
base table length: 324
version: 1.4
checksum: 0xcb
OEM ID: ' '
Product ID: 'SE7500CW2'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 32
local APIC address: 0xfee00000
extended table length: 144
extended table checksum: 98
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x14 BSP, usable 15 2 4 0x3febfbff
6 0x14 AP, usable 15 2 4 0x3febfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 PCI
5 ISA
--
I/O APICs: APIC ID Version State Address
2 0x20 usable 0xfec00000
3 0x20 usable 0xfec80000
4 0x20 usable 0xfec80400
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 5 0 2 0
INT active-hi edge 5 1 2 1
INT active-hi edge 5 0 2 2
INT active-lo level 4 5:A 2 23
INT active-hi edge 5 4 2 4
INT active-lo level 0 29:B 2 19
INT active-hi edge 5 6 2 6
INT active-hi edge 5 7 2 7
INT active-hi edge 5 8 2 8
INT active-hi edge 5 9 2 9
INT active-lo level 0 29:A 2 16
INT active-lo level 0 31:B 2 17
INT active-hi edge 5 12 2 12
INT active-hi edge 5 13 2 13
INT active-hi edge 5 14 2 14
INT active-hi edge 5 15 2 15
INT active-lo level 4 3:A 2 21
INT active-lo level 4 4:A 2 20
INT active-lo level 4 6:A 2 22
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 5 0 255 0
NMI active-hi edge 5 0 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x40000000
address range: 0xbee00000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfee01000
address range: 0x11ff000
--
System Address Space
bus ID: 4 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 4 address type: memory address
address base: 0xcc000
address range: 0x18000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x3ff80000
address range: 0x80000
--
Bus Heirarchy
bus ID: 5 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
===============================================================================
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
