Hello Warner, --- "M. Warner Losh" <[EMAIL PROTECTED]> wrote: > > Basically, you add it to sys/dev/pccard/pccarddevs, run make -f > Makefile.pccarddevs in that directory, then add the line you talked > about in your other email to if_wi_pccard.c. The first part of this > is desirable reguardless of if if_wi supports this card or not. There > was some other mail suggesting it was a 'flash-less' card needing > firmware downloaded to it before it would work.
Ok, the card is now recognized by the driver... wi0: <D-Link DWL-650 Wireless PC Card RevP> at port 0x200-0x27f irq 10 function 0 config 1 on pccard0 However (as Oleg Polyakov suggested), this still won't work because the card doesn't have firmware. Here's what I see now: wi0: timeout in wi_cmd 0x0000; event status 0x0000 wi0: wi_cmd: busy bit won't clear. : init failed device_probe_and_attach: wi0 attach returned 6 A quick search didn't turn up information on how to obtain firmware and upload it to the card. D-Link has seems to have a pretty good support web site, but nothing for FreeBSD (I wasn't expecting anything). Is there something like Linux's prism2_srec tool for uploading firmware onto these cards? Thanks, -brian __________________________________ Do you Yahoo!? Yahoo! Finance Tax Center - File online. File on time. http://taxes.yahoo.com/filing.html _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
