It's not red but it is the PRI_RAID IDE connector. I have the controller set to IDE in the BIOS so it should act just as any other IDE controller (according to the manual and many other sources).
I have two hard drives on the primary IDE (not on the controller) and a CD
drive on the secondary IDE (also not on the controller). Then I have two
more hard drives on the PRI_RAID channel (which *is* the P-ATA channel on
the controller). Those two drives are getting the failure (or at least one
is - see the error messages in my original text).
I wish I had an S-ATA drive to test with so that I could verify that it's a
problem with the P-ATA part of this controller.
Thats a known problem, its partly fixed in -current, the real fix is in the works. Try to take /sys/dev/ata from a fresh -current and let me know if that helps you.
--
-S�ren
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
