Sorry for top-posting before... in any case... On Thu, 1 Sep 2005, Robert Ken Francis wrote:
Sorry to keep you in the dark about my hard drives. I have a 120GB drive master and a DVD reader as slave on ata0, ata1 is dead (the BIOS won't detect anything), ata2 and ata3 are the Adaptec ATA RAID 1200A card (HighPoint chipset). All of the FAILUREs went away when I disconnected the ata2 and ata3 drives from the card. See my dmesg below for details. I'm guessing that SET FEATURES means I have set some features? I think the ata guy is at [EMAIL PROTECTED]
Well, I would expect the SET FEATURES bit to be in the ata code itself, as it's trying to probe your hardware, and set the features for that drive so it will work with the card. The code is probably having the card go through a bunch of possible feature subsets for what is attached, and probably can't find anything that fits for that particular hardware.
sos@ seems to be about right.I hate to say this, as I'm horrible with older hardware myself (if it still is functional I still try to use it somewhere), but it might be time to give up the ghost on the older drives, and mount them on the wall as museum pieces... :)
I don't know what you could do with the settings on the Adaptec card to try to set lower speed settings manually, as I only have one card myself of that type, and it's in a production box at the moment.
If you want to keep those drives around, I'd see if you can find an older IDE controller to hang them off of, as you'll probably get nowhere with keeping it on the newer cards.
And sos might tell you that it's too old for him to support it in the new code framework (but I'm putting words in his mouth, I apologize), or he may try to work up some patches.
If you want, I can ship you a couple "newer" 6 and 8GB drives so you can retire your relics... :)
-Gary
Thanks, Rob Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <ASUS P4SP-MX > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.40GHz (2400.18-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HT T,TM,PBE> real memory = 1040171008 (991 MB) avail memory = 1008300032 (961 MB) ioapic0 <Version 8.0> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS P4SP-MX> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 651 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 962 UDMA133 controller> port 0xa400-0xa40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 2.5 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fff irq 20 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 21 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0x8800-0x88ff mem 0xe5800000-0xe5800fff irq 19 at device 4.0 on pci0 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:0e:a6:98:41:8b atapci1: <HighPoint HPT370 UDMA100 controller> port 0x7000-0x70ff,0x7400-0x7403,0x7800-0x7807,0x8000-0x8003,0x8400-0x8407 irq 17 at device 14.0 on pci0 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 pci0: <multimedia, audio> at device 16.0 (no driver attached) fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2400179128 Hz quality 800 Timecounters tick every 10.000 msec ad0: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] at ata0-master UDMA133 acd0: DVDROM <COMPAQ DVD-ROM GDR8160B/0012> at ata0-slave PIO4 Mounting root from ufs:/dev/ad0s1a-----Original Message----- From: Gary D. Margiotta [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 30, 2005 8:41 PM To: Robert Ken Francis Cc: [email protected] Subject: RE: Adaptec ATA RAID 1200A card supported? Ok, I can see the explanation about the Highpoint chip. Based upon the actual error messages, I would examine the cables and speed settings first. My interpretation of the errors is that the card is having trouble finding a speed setting that will work with what I assume are ancient hard drives. The 42MB and 100MB drives I would guess are old, and don't speak DMA, or even a high PIO mode, and therefore are giving trouble when the card tries to set what the card thinks is a reasonable transfer speed setting. Out of curiosity, what happens if you were to unplug all the older drives from the card, and boot with only the newer hard drive attached and on (and maybe the CD drive, that should be fine as well)? If the errors go away I would then assume that it is a speed setting issue with the older drives, and then look further in that area. You might want to include Soren (the ata code maintainer) a little further down the line (if you search the -current mailing archives for ata, you'll find his e-mail address, I don't have it handy), if it does turn out to be a setting, which he may be better able to explain than I, being that he understands this stuff much better. Who knows, it may be something that needs a sysctl tunable, or maybe an alteration to the code, but some more troubleshooting should be done. Trying out the cables and that stuff first means you don't have to delve into a custom kernel at the moment, so try what's easiest first, and go from there. -Gary On Tue, 30 Aug 2005, Robert Ken Francis wrote:Thanks for responding. I'm not sure what to do about this.Someonein FreeBSD questions said it was related to atapi or SCSI.The 1200A cardhas a Highpoint HPT370 chip on it. I can see atapci1,ata2, and ata3.Maybe the hard drives cause these driver failures? I can try to take out atapifd and see if the errors go away, which means I will have to build a kernel. Does anyone know whatcauses the belowFAILUREs? Thanks, Rob-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gary D. Margiotta Sent: Sunday, August 28, 2005 11:13 AM To: Robert Ken Francis Cc: [email protected] Subject: Re: Adaptec ATA RAID 1200A card supported? The card itself is supported fine, the box I'm composing this mail from is using solely an Adaptec 1200A card, running 5-STABLE (which was originally installed with 5.2.1, and have been tracking -STABLE since). I don't see the Adaptec card getting probed in your dmesg... I see the onboard SiS controller (atapci0 with ata0 and ata1), and a HighPoint card (atapci1 with ata-2 and ata-3), and the errors I see are coming from the ata-2 and ata-3 channels, which are on the HighPoint controller. -Gary On Sun, 28 Aug 2005, Robert Ken Francis wrote:I have failures like the below: ata2-master: FAILURE - SETFEATURES SET TRANSFER MODE status=51<READY,DSC,ERROR> error=4<ABORTED> What do I do to fix these failures? All of the "FAILURE"drives areon my Adaptec ATA RAID 1200A card. My secondary built-inIDE is deadso I have to use this card as an IDE replacement. Thanks, Rob Note that NetBSD doesn't have this problem. Here is my dmesg: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,1992, 1993, 1994The Regents of the University of California. All rightsreserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <ASUS P4SP-MX > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.40GHz (2400.18-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HT T,TM,PBE> real memory = 1040171008 (991 MB) avail memory = 1008295936 (961 MB) ioapic0 <Version 8.0> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS P4SP-MX> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port0xe408-0xe40b on acpi0cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 651 host to AGP bridge> mem0xe8000000-0xebffffff at device 0.0 on pci0pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 962 UDMA133 controller> port0xa400-0xa40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 2.5 on pci0ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fffirq 20 at device 3.0 on pci0usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fffirq 21 at device 3.1 on pci0usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0x8800-0x88ff mem0xe5800000-0xe5800fff irq 19 at device 4.0 on pci0miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:0e:a6:98:41:8b atapci1: <HighPoint HPT370 UDMA100 controller> port0x7000-0x70ff,0x7400-0x7403,0x7800-0x7807,0x8000-0x8003,0x8400 -0x8407 irq 17 atdevice 14.0 on pci0 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 pci0: <multimedia, audio> at device 16.0 (no driver attached) fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq6 drq 2 on acpi0fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <ECP parallel printer port> port0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4flags 0x10 on acpi0sio0: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq1 on acpi0atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROMs> at iomem0xcc000-0xd07ff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2400181916 Hz quality 800Timecounters tick every 10.000 msec ad0: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] atata0-master UDMA133acd0: DVDROM <COMPAQ DVD-ROM GDR8160B/0012> at ata0-slave PIO4 ata2-master: FAILURE - SETFEATURES SET TRANSFER MODEstatus=51<READY,DSC,ERROR> error=4<ABORTED>ata2-master: FAILURE - SETFEATURES SET TRANSFER MODEstatus=51<READY,DSC,ERROR> error=4<ABORTED>ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODEstatus=51<READY,DSC,ERROR> error=5<ABORTED,ILLEGAL_LENGTH>ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODEstatus=51<READY,DSC,ERROR> error=5<ABORTED,ILLEGAL_LENGTH>ad4: FAILURE - SETFEATURES ENABLE RCACHEstatus=51<READY,DSC,ERROR> error=4<ABORTED>ad4: FAILURE - SETFEATURES ENABLE WCACHEstatus=51<READY,DSC,ERROR> error=4<ABORTED>ad4: 40MB <MiniScribe Corporation 8051A/3.73> [745/4/28] atata2-master PIO0ad5: FAILURE - SETFEATURES ENABLE WCACHEstatus=51<READY,DSC,ERROR> error=5<ABORTED,ILLEGAL_LENGTH>ad5: 41MB <Conner Peripherals 40MB - CP3041/S2.46>[1053/2/40] at ata2-slave PIO0ata3-master: FAILURE - SETFEATURES SET TRANSFER MODEstatus=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>ata3-master: FAILURE - SETFEATURES SET TRANSFER MODEstatus=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>ata3-slave: FAILURE - SETFEATURES SET TRANSFER MODEstatus=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>ata3-slave: FAILURE - SETFEATURES SET TRANSFER MODEstatus=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>ad6: FAILURE - SETFEATURES ENABLE WCACHEstatus=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>ad6: 102MB <st3120AT/REV184.0> [1024/12/17] at ata3-master PIO0 ad7: FAILURE - SETFEATURES ENABLE WCACHEstatus=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>ad7: 102MB <st3120AT/REV184.0> [1024/12/17] at ata3-slave PIO0 ad4: FAILURE - READ status=51<READY,DSC,ERROR>error=10<NID_NOT_FOUND> LBA=18 Mounting root from ufs:/dev/ad0s1a-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.16/83 - ReleaseDate: 8/26/2005_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.17/84 - ReleaseDate: 8/29/2005_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"-- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.17/84 - Release Date: 8/29/2005-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.18/88 - Release Date: 9/1/2005 _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
