Julien Nury wrote: > I try to install FreeBSD 6.0 on a i386 with a Highpoint RocketRAID 1520 >(with HPT372N Chipset). I have 2 identical disks in RAID1. The system is >correctly detected at boot : > >In the install process I can create ar0s1a, but when it starts to write on >the disk (to create fs table) I get the following error sequence : > >--------------------------------------------------------------------------- >ad6: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> >error=5<ABORTED,ILLEGAL_LENGHT> LBA=63 >ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode >ad4: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> >error=5<ABORTED,ILLEGAL_LENGHT> LBA=9 >ada4: write metadata failed >ad4: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> >error=5<ABORTED,ILLEGAL_LENGHT> LBA=63 >ar0: FAILURE - RAID1 array broken >---------------------------------------------------------------------------
I tried to install without RAID1 (only ad4 and ad6 appeared in the disk list). I made my partitions on ad4 and when the install process tried to write on the disk I got the same errors : ad4: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> error=5<ABORTED,ILLEGAL_LENGHT> LBA=xx So, it seems like my problem come from ata and not from ataraid. Regards Julien Nury _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
