On Monday 06 February 2006 22.42, John Baldwin wrote: > On Tuesday 27 December 2005 11:17, John Baldwin wrote: > > On Monday 26 December 2005 04:36 pm, Adriaan de Groot wrote: > > > On Monday 26 December 2005 17:44, Alexander Konovalenko wrote: > > > > recently I have upgraded my AMD Athlono-XP laptop to 6.0 STABLE, > > > > everything works fine, even suspending with zzz works except > > > > network interface vr0 which is in state "no carrier" right after wake > > > > up. The only thing which helps is reboot. > > > > > > I just finished working on a Via C3-mini ITX box, also with a vr0 > > > interface; it's not a laptop, but I felt it needed to suspend anyway. > > > Suspend into S3 causes the vr0 to hang on resume, in my case with > > > regular vr0: watchdog timeout messages. > > > > > > Solution: reset the driver. > > > > > > Implementation: build a custom kernel with _no_ vr interface built in. > > > Make sure vr is built as a module. In the suspend script, unload the > > > module. In resume, reload it, then run rc.d/netif and rc.d/routing. For > > > simple machines with uncomplicated interfaces and routing, that ought > > > to do the trick. > > > > You can try stopping the chip during suspend and init on resume. > > Something like this: > > Did the patch below work (did you try it)? >
Unfortunately it did not work, suspend cause "no carrier" anyway :-( Thanks for help anyway /Alexander Konovalenko _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
