I have a Precision 390 with a BCM5754, FreeBSD recognizes it as a
BCM5787 then panics the machine. I have a screenshot of the panic here,
http://users.centtech.com/~kramer/broadcom/bge_prec390.jpg
and I've booted the host into a FC3 nfsroot using kernel 2.6.18. Here is
the dmesg and scanpci -v output
DMESG
tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express)
10/100/1000Base
T Ethernet 00:13:72:25:67:ec
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
SCANPCI -v
pci bus 0x0004 cardnum 0x00 function 0x00: vendor 0x14e4 device 0x167a
Broadcom Corporation Device unknown
CardVendor 0x1028 card 0x01de (Card unknown)
STATUS 0x0010 COMMAND 0x0006
CLASS 0x02 0x00 0x00 REVISION 0x02
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x10
BASE0 0x00000000eddf0004 addr 0x00000000eddf0000 MEM 64BIT
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
--
------------------------------
Kevin Kramer
Sr. Systems Administrator
512.418.5725
Centaur Technology, Inc.
www.centtech.com
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
