On Wednesday 06 December 2006 00:06, Josh Stephenson wrote: > I'm having trouble installing FreeBSD on the following system: > Intel Desktop Board DG965SS motherboard > Intel Core Duo 2.8GHz > 1GB Memory > 1 SATA hard-drive > 1 dvd/cd-burner sony dru-120c > > Here's the problem: > > When I boot the install, I get: > Too many holes in the physical address space, giving up > Too many holes in the physical address space, giving up > Too many holes in the physical address space, giving up > .....
You can probably ignore those. > and then the system hangs at either this line: > Interrupt storm detected on "irq17:"; throttling interrupt source > > or sometimes, I actually get into the install screen, but the response > is ridiculously slow. ie- I press the down arrow, and 30 seconds later, > it respons, but eventually it just hangs completely. > > Any help would be much appreciated. Try disabling ACPI and/or APIC as a test. -- John Baldwin _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
