On 12/9/06, CleanPHP Team <[EMAIL PROTECTED]> wrote:
Hi
after long time googling and lists.freebsd searching, i'm hopefull to
find the solution for my problem in the right place
so, i was unable to install FreeBSD 6.1 RELEASE from cdrom.
after boot up from the cdrom, it says my cd looks more like audio one,
than FreeBSD disc
weel, i gave up, and instaled the system from FTP
system stands up, Xorg + Gnome works great
but ...
i can not use cdrom!
dmesg says:
acd0: DVDR <HL-DT-ST DVD-RW GWA-4082N/CG02> at ata1-master UDMA33
I'm writing this from a lifebook E8010 but my cdrom device is
different. Here's my dmesg with atapicam enabled in kernel config:
acd0: CDRW <UJDA750FDVD/CDRW/1.22> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA750FDVD/CDRW 1.22> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c
losed
verbose dmesg says "Unretryable error" when try to read from device
mount /cdrom says:
mount_cd9660: /dev/acd0: Invalid argument
The last strange thing - on another(non BSD) systems, this device works
properly.
Can you try another cdrom device on your system?
did anybody encountered such problems?
Thanks
Hope this helps
Nuno
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
