Alex I have a PowerEdge 860 with the SAS 5i/R controller in it and it works fine with 6.2-RC1 (uses MPT + direct access SCSI modules). One thing that I have noticed, however, is that when testing performance under Bonnie++ the write times (both characters and blocks) are slow (~6.5MB/sec). I have not tried making multiple RAID volumes, which I hear is an issue with this controller + fBSD.
Adam On Tue, 2006-12-05 at 17:42 +0000, Alex Zbyslaw wrote: > Does anyone know what the standard SATA controller is on on a Dell 1900 > and if it is supported by FreeBSD? Browsing the Dell website has left > me goggle eyed and none the wiser :-( > > What about the SAS 5/iR? Is that the same as the Dell PERC5/i listed > under the mfi driver or is there some other driver which supports it? > And does it really support SATA as well as SAS disks as the Dell website > implies? > > Are there any other show stopping issues with these machines? (I know > that the ethernet driver had some issues - resolved in 6.2? - and that > the DRAC5 probably doesn't work well). > > All information gratefully received. > > --Alex > > > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > -- Adam Todorski Sr System Administrator Scientific Computation Research Center Rensselaer Polytechnic Institute Troy, NY USA Office: (518) 276-8376 Fax: (518) 276-4886 _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
