Hi John, I tested the blades on the AMD platform with the Embedded NC370i Network adapter and it works fine under 6-stable. I was wondering if there is any patch that I could apply under 6-2 release for that network adapter. The reason I'm asking is because we are talking for 3 servers 2ns and 1mail and it would make me feel better following the release branch.
Thanks again, George Kontostanos On 3/30/07, John Baldwin <[EMAIL PROTECTED]> wrote:
On Friday 30 March 2007 01:41:47 pm George Kontostanos wrote: > On 3/30/07, John Baldwin <[EMAIL PROTECTED]> wrote: > > > > On Friday 30 March 2007 09:46:53 am George Kontostanos wrote: > > > Greetings everyone, > > > > > > We are about to proceed to a major upgrade for our servers. I was > > looking > > > at the new HP ProLiant BL460c witch according to the technical specs at: > > > > > > > http://h18004.www1.hp.com/products/servers/proliant-bl/c-class/460c/specifications.htmlcomes > > > with the embedded NC370i network controller. However, after a lot of > > > goggling I found out that there are compatibility problems with that > > > controller. Any suggestions are kindly welcomed. > > > > If it's the bce(4) part with SerDes RELENG_6 will support it, though 6.2 > > doesn't. 6.3 will include fully support however. > > > > -- > > John Baldwin > > > It is the : > > Embedded NC370i Multifunction Gigabit Server Adapter Network Processor > Broadcom 5706 > > I saw that HP ships that adapter only in the AMD platform which I'm > considering of purchasing. > Any ideas about that ? That should work with bce(4) in 6.x-stable. -- John Baldwin
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
