Hi,
On 18 Apr 2007, at 04:55, Ivan Carey wrote:
Bob Bishop wrote:
Hi,
On 16 Apr 2007, at 23:25, Ivan Carey wrote:
Hello
Does FreeBSD 6.2 release support the Intel® Server Board
S5000VSA, [etc]
Can't speak to this specific board, but the closely-related
S5000PAL works just fine.
--
Bob Bishop +44 (0)118 940 1243
[EMAIL PROTECTED] fax +44 (0)118 940 1295
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-
[EMAIL PROTECTED]"
Thanks Peter,
?
I have looked at the comparison of the 2 boards. http://
compare.intel.com/pcc/showchart.aspx?
mmID=24664,24665&familyID=9&culture=en-US
They both use an ICH type of 6321ESB http://download.intel.com/
design/chipsets/datashts/31308201.pdf
The ata(4) man page lists support for 6300ESB do you know if this
is similar to the 6321ESB
I believe ata(4) should probably say 63xxESB. Anyway, the probe (on a
S5000PAL) says:
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 20 at device
31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40d8-0x40df,
0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x403f mem
0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ata6: <ATA channel 4> on atapci1
ata7: <ATA channel 5> on atapci1
--
Bob Bishop +44 (0)118 940 1243
[EMAIL PROTECTED] fax +44 (0)118 940 1295
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
