I have some boxes, built on motherboards Gigabyte GB-6VA+ (VIA Apollo Pro chipset). Do not say me, that's bullshit, I know :-/
Some of these boxes works under 4.5-RELEASE, some under Windows 2000. Sometime it should be upgraded on to 6.x branch, but I cannot use it - when I install 6.x on these boxes, I cannot bring up any network interface - link leds on card brights, but no any traffic can pass, even on neighbour box! I see xl0: watchdog timeout xl0: watchdog timeout ... messages on console. Later. When connect HDD to motherboard through ordinary (40-wired) cable, 6.x says, that HDD is broken! I see endless messages DMA_ERROR..., CRC_ERROR... etc When I change cable to UDMA (80-wired) - all these messages are disapper Later. When I boot box with "ACPI disabled" network cards works! But box hangs up after about 5-10 minutes of active work. Cooler does not stop but box hangs completely, only reset works. -- With Best Regards. Rashid N. Achilov (RNA1-RIPE), Web: http://www.askd.ru/~shelton OOO "ACK" telecommunications administrator, e-mail: achilov-rn [at] askd.ru PGP: 83 CD E2 A7 37 4A D5 81 D6 D6 52 BF C9 2F 85 AF 97 BE CB 0A _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
