Sean Farley wrote: > I have recently assembled a new system with a SATA DVD drive. > Unfortunately, it seems to not be supported FreeBSD 7: > > ata7: <ATA channel 5> on atapci0 > ata7: SATA ATAPI devices not supported yet > ata7: [ITHREAD]
This is (semi-) fixed in 8-Current (reports sata/300 as sata/150 on actual storage devices) > > > I am using software (BIOS) RAID on a P5K-E/WiFi (Intel P35 chipset) > board. Sadly, the option to manually configure the DVD drive is only > available when in IDE mode. P35's in general have some issues. For example I am still totally unable to see my PATA drives if I have SATA drive(s) installed. > > In the interim, is it possible to force the drive to IDE (really UDMA) > mode? I tried a few attempts at the kernel source to force it to UDMA33 > at the point of the warning in ata-chipset.c, but these resulted in > panics. I have an old 7 patch if you want it. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
