On Sun, 4 Nov 2007 16:17:42 +0100 [EMAIL PROTECTED] wrote: > Hi All, > > I recently bought a DWL-G510 because i thought it > was supported on freebsd 6.2 trough ral device. > > Unfortunately it happens that this card is a rev C2 > model and, as I found later , this seem to not be > correctly handled :( > > This is how the card is seen by the system: > > 00:13.0 Network controller: RaLink RT2561/RT61 rev B 802.11g > Subsystem: D-Link System Inc DWL-G510 Rev C > Flags: bus master, slow devsel, latency 32, IRQ 255 > Memory at f4800000 (32-bit, non-prefetchable) [disabled] > Capabilities: [40] Power Management version 2 > > Actually the if_ral module loads but it fails to associate: > > ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > ether 00:15:e9:b3:79:14 > media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps) > status: no carrier > ssid homenet channel 5 > authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit wepkey > 2:40-bit wepkey 3:40-bit wepkey 4:40-bit txpowmax 100 bmiss > 7 protmode CTS bintval 100 > > > it keeps searching for the channel (it changes every time I do > an ifconfig ral0) > > I saw that someone has filed a bug report on it (kern/109227), > but no progress so far. > > The bug reports stats that the cards works on FreeBSD 7.0, > but as far as I tried it doesn't work for me. > > I tried with ndisgen too without success. > > The cards comes up but It doesn't associate. > > Does anyone have any hint? >
About the simmilar case as of me.
Try using ndisgen + Win9x drivers (rt61_9x.sys/inf from the driver
CD). Works for me (well, for now at least..).
--
Ariff Abdullah
FreeBSD
... Recording in stereo is obviously too advanced
and confusing for us idiot ***** users :P ........
pgpvdiE2V6oAp.pgp
Description: PGP signature
