Good evening all, I've been running FreeBSD since 1.1, and this is the first time I've ever had hardware I couldn't manage to install on, but I upgraded my desktop at home recently, and I can't get an install CD to boot on my machine.
Hardware (output from Windows System Info): IRQ 0 System timer OK IRQ 6 Standard floppy disk controller OK IRQ 8 System CMOS/real time clock OK IRQ 11 Intel(R) ICH9 Family SMBus Controller - 2930 OK IRQ 13 Numeric data processor OK IRQ 16 Intel(R) G33/G31/P35 Express Chipset PCI Express Root Port - 29C1 OK IRQ 16 Intel(R) ICH9 Family USB Universal Host Controller - 2937 OK IRQ 16 Intel(R) ICH9 Family PCI Express Root Port 1 - 2940 OK IRQ 17 High Definition Audio Controller OK IRQ 17 Intel(R) ICH9 Family PCI Express Root Port 2 - 2942 OK IRQ 17 Standard Dual Channel PCI IDE Controller OK IRQ 18 Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C OK IRQ 18 Intel(R) ICH9 Family PCI Express Root Port 3 - 2944 OK IRQ 18 Generic Marvell Yukon Chipset based Ethernet Controller OK IRQ 18 Intel(R) ICH9 Family USB Universal Host Controller - 2936 OK IRQ 19 Intel(R) ICH9 Family USB Universal Host Controller - 2939 OK IRQ 19 Intel(R) ICH9 Family USB Universal Host Controller - 2935 OK IRQ 19 Intel(R) ICH9 4 port Serial ATA Storage Controller 1 - 2920 OK IRQ 19 Intel(R) ICH9 2 port Serial ATA Storage Controller 2 - 2926 OK IRQ 20 Texas Instruments OHCI Compliant IEEE 1394 Host Controller OK IRQ 21 Intel(R) ICH9 Family USB Universal Host Controller - 2938 OK IRQ 21 Pinnacle WDM PCTV Video Capture OK IRQ 21 Pinnacle WDM PCTV Audio Capture OK IRQ 22 High Definition Audio Controller OK IRQ 22 Creative SB Audigy OK IRQ 23 Intel(R) ICH9 Family USB Universal Host Controller - 2934 OK IRQ 23 Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A OK IRQ 23 OHCI Compliant IEEE 1394 Host Controller OK IRQ 80 Microsoft ACPI-Compliant System OK (IRQs 81 - 189 are identical to the prior and following entries) IRQ 190 Microsoft ACPI-Compliant System OK IRQ 4294967294 ATI Radeon HD 2900 XT OK Hard drives installed are : Maxtor 6L200R0 ATA133, Maxtor 6Y080M0 SATA150, and a Seagate ST3250620AS SATA3.0Gb ( I have 20GB set aside for FreeBSD on this drive). Optical drives are : Pioneer DVR-107D ATA and a Plextor PX-716SA SATA Processor : Intel E6700 (Core2 Duo 2.66Ghz) Memory : Crucial Ballistix 2x1GB DDR800 The motherboard is an Abit IP35, and I've tried booting 7.0-BETA4, 6.3-RC3, and 6.2-R install CDs. All of them hang in the same place, while probing UHCI2. The keyboard is a Saitek Eclipse and the mouse is a Logitech Mx 518. I was using both of them prior to upgrading my hardware without any problems. I was tracking RELENG_6 previously. I've tried setting the SATA controller to AHCI and IDE mode, and it hangs in the same place either way (not unexpected, since the kernel hangs long before ever getting around to probing it). I'm running Vista and planning to dual boot the machine (I'm running Vista Ultimate and tracking RELENG_6 on my Latitude D820 with no problems currently). If anyone has any suggestions, I'm all ears. Jamie Bowden -- "It was half way to Rivendell when the drugs began to take hold" Hunter S Tolkien "Fear and Loathing in Barad Dur" Iain Bowen <[EMAIL PROTECTED]> _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
