Vinícius Abrahão wrote:
Hi People,
First, sorry about my poor english.
I have modem usb: hsdpa/edge/gprs, but I don't know how to
make this work. This is the description about the device:
umass0: <Qualcomm, Incorporated USB ONDA Storage, class 0/0, rev 1.10/0.00,
addr 2> on uhub2
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <ONDA USB Storage 2.31> Removable CD-ROM SCSI-2 device
cd0: 1.000MB/s transfers
cd0: cd present [4623 x 2048 byte records]
GEOM_LABEL: Label for provider cd0 is iso9660/ONDAMODEM
At my kernel configuration file we find:
device ugen # Generic
device ucom # Modem UCOM
device ugencom # Modem CDMA MSM
device umodem # Modem COM
Thanks in advice for any light.
Since we don't have yet a way to unplug these modems from umass, you
should remove umass, ugen, ucom, etc. from your kernel config file and
build it as modules.
I have a similar modem, and what I did was:
1) Don't have umass.ko loaded.
2) Wait a few seconds. The device will disconnect.
3) ubsa(4) should support these modems, so have it loaded, or load it now.
Hope this works,
--
Rui Paulo
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
