Jeremy Chadwick wrote: > Re: SATAII: if the product data sheet or the user manual states the card > supports SATA300, then yes. > > Re: NCQ: the user manual probably answers this question, or a FAQ/KB > article. I hope you're not planning on disabling write caching on your > disks (as people often ask if controllers or drives supports command > queueing so they can do this. NCQ does not provide the amount of > performance increase like SCSI command queuing does. On the other > hand, TCQ (often found on SAS drives) does.)
That's a good point about the cache, I forgot about the one on the drives. > I have no idea. I suppose it would have to support pass(4), or provide > the functionality itself (Areca controllers do the latter). 3ware as well I am told. > I recommend avoiding Adaptec. I will repeat that: avoid Adaptec. I appreciate the comment, can you tell me why or is it a personal preference? > You are not going to find a SATA card that has non-RAID capability with > that amount of ports. Besides, it shouldn't matter to you if the card > has RAID capability, because nothing forces you to use it. All that > should matter to you is the following: > > * Is the card version/model supported under FreeBSD? > * Does the card supports disks in a JBOD fashion (not part of an array)? > * Can I get SMART stats from the drive (or via CLI; see below)? > * Is there a native FreeBSD CLI binary for controlling features of the > controller if I need it? Yup. > >> There is not much out there and it's all expensive. > > But neither of these are FreeBSD problems. The same would apply if you > were using any operating system. No, I agree it is not a Freebsd problem. It's everything to do with demand at the moment. > I have not seen these on any of our systems. Chances are they're ACPI > or AML errors which can be fixed by the vendor with a BIOS upgrade. > I would recommend asking about this on freebsd-acpi instead. Thanks! -D _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
