Hello everyone, this is my first post to this list, I hope my problem belongs here.
I have a Logitech Communicate STX webcam which works under Linux using the gspca driver but not using FreeBSD. When booting and loading the kernel module I get the [2] in dmesg, usbdevs is showing [1] I would love to use my webcam for skype with video but I am not sure what information needs to be provided, and what I can do to help fix the problem. This seems to be my Webcam: 0x08d7 Searching for that has turned up this site http://www.lissyara.su/?id=1850 which unfortunately is not readable by me. I would appreciate it if anyone could look into this. kind Regards Christof Schulze [1] output from usbdevs -v (shortened) % usbdevs addr 1: UHCI root hub, Intel addr 1: UHCI root hub, Intel addr 2: product 0x08d7, vendor 0x046d addr 1: UHCI root hub, Intel addr 1: UHCI root hub, Intel addr 2: Kyocera Mita FS-1020D, Kyocera Mita addr 3: USB Receiver, Logitech addr 1: EHCI root hub, Intel 1:20 eri.erika% usbdevs --help % usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: full speed, power 100 mA, config 1, product 0x08d7(0x08d7), vendor 0x046d(0x046d), rev 1.00 Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: full speed, self powered, config 1, Kyocera Mita FS-1020D(0x000e), Kyocera Mita(0x0482), rev 0.00 port 2 addr 3: low speed, power 98 mA, config 1, USB Receiver(0xc518), Logitech(0x046d), rev 42.00 Controller /dev/usb4: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00 [1] dmesg (shortened) gspca_attach_bridge: USB GSPCA camera found.(ZC3XX) spca5xx_probe: [spca5xx_probe:4259] Camera type JPEG zc3xx_config: [zc3xx_config:616] Find Sensor HV7131R(c) spca5xx_getcapability: [spca5xx_getcapability:1239] maxw 640 maxh 480 minw 176 minh 144 0 [1117] video_register_device: to be fixed but ok for now ldev0: vendor 0x046d product 0x08d7, rev 1.10/1.00, addr 2 uaudio0: <vendor 0x046d product 0x08d7, class 0/0, rev 1.10/1.00, addr 2> on uhub1 uaudio0: audio rev 1.00 pcm1: <USB Audio> on uaudio0 ulpt0: <Kyocera Mita Kyocera Mita FS-1020D, class 0/0, rev 1.01/0.00, addr 2> on uhub3 ulpt0: using bi-directional mode ums0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 3> on uhub3 ums0: 16 buttons and Z dir. uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 3> on uhub3 WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ZFS filesystem version 6 ZFS storage pool version 6 acd0: CDRW <SAMSUNG CDRW/DVD SM-352N/TA00> at ata0-master UDMA33 ad1: DMA limited to UDMA33, controller found non-ATA66 cable ad1: 190782MB <Seagate ST3200826A 3.02> at ata0-slave UDMA33 ad4: 78533MB <Hitachi HDS722580VLSA80 V32OA63A> at ata2-master SATA150 ad6: 238475MB <SAMSUNG SP2504C VT100-50> at ata3-master SATA150 ad10: 238475MB <SAMSUNG SP2504C VT100-50> at ata5-master SATA150 Waiting 5 seconds for SCSI devices to settle pcm0: <HDA Codec: Realtek ALC880> pcm0: <HDA Driver Revision: 20080420_0052> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 cd0 at ata0 bus 0 target 0 lun 0 cd0: <SAMSUNG CDRW/DVD SM-352N TA00> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s2a fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 drm0: <ATI Radeon RV370 X300 SE> on vgapci0 info: [drm] Initialized radeon 1.25.0 20060524 info: [drm] Setting GART location based on new memory map info: [drm] Loading R300 Microcode info: [drm] writeback test succeeded in 1 usecs drm0: [ITHREAD] 67540 [1081] video_devdata: not complete but ok for now spca5xx_set_light_freq: [spca5xx_set_light_freq:1920] Sensor currently not support light frequency banding filters. gspca_set_isoc_ep: [gspca_set_isoc_ep:936] ISO EndPoint found 0x81 AlternateSet 7 ldev_ioctl: called linux: pid 2021 (skype): ioctl fd=9, cmd=0x7601 ('v',1) is not implemented 69568 [ 959] usb_kill_urb: not complete but try something 69569 [ 766] ldev_isoc_handler: usbd_cancelled 0xc6609a00 69571 [ 766] ldev_isoc_handler: usbd_cancelled 0xcc0cb200 69572 [ 766] ldev_isoc_handler: usbd_cancelled 0xcc0b2a00 69573 [ 766] ldev_isoc_handler: usbd_cancelled 0xcbef3e00 69576 [ 959] usb_kill_urb: not complete but try something 69576 [ 959] usb_kill_urb: not complete but try something 69576 [ 959] usb_kill_urb: not complete but try something 9456429 [1081] video_devdata: not complete but ok for now spca5xx_set_light_freq: [spca5xx_set_light_freq:1920] Sensor currently not support light frequency banding filters. gspca_set_isoc_ep: [gspca_set_isoc_ep:936] ISO EndPoint found 0x81 AlternateSet 7 9457653 [ 770] ldev_isoc_handler: status 16 9457669 [ 770] ldev_isoc_handler: status 16 9457684 [ 770] ldev_isoc_handler: status 16 9457762 [ 770] ldev_isoc_handler: status 16 9459407 [ 959] usb_kill_urb: not complete but try something 9459410 [ 959] usb_kill_urb: not complete but try something 9459410 [ 959] usb_kill_urb: not complete but try something 9459410 [ 959] usb_kill_urb: not complete but try something
signature.asc
Description: This is a digitally signed message part.
