Hi there. I have a tape library, but I can't seem to send it commands.
It's recognized on the bus: # grep ch0 /var/run/dmesg.boot ch0 at isp0 bus 0 target 0 lun 1 ch0: <HP MSL G3 Series 6.00> Removable Changer SCSI-5 device ch0: 400.000MB/s transfers ch0: Command Queueing Enabled ch0: 48 slots, 2 drives, 1 picker, 0 portals And I can read status and voltags and such from it: # chio status -vS | tail -8 slot 42: <ACCESS,FULL> voltag: <000026L4:0> source: <slot 42> slot 43: <ACCESS,FULL> voltag: <000020L4:0> source: <slot 43> slot 44: <ACCESS,FULL> voltag: <000039L4:0> source: <slot 44> slot 45: <ACCESS,FULL> voltag: <000040L4:0> source: <slot 45> slot 46: <ACCESS,FULL> voltag: <000043L4:0> source: <slot 46> slot 47: <ACCESS,FULL> voltag: <000031L4:0> source: <slot 47> drive 0: <ACCESS> voltag: <:0> source: <> drive 1: <ACCESS,FULL> voltag: <000030L4:0> source: <slot 16> But I can't send commands: # chio move slot 43 drive 0 chio: /dev/ch0: CHIOMOVE: Device not configured # tail -6 /var/log/messages Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): MOVE MEDIUM. CDB: a5 0 0 0 4 14 0 1 0 0 0 0 Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): CAM Status: SCSI Status Error Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): SCSI Status: Check Condition Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): ILLEGAL REQUEST asc:25,0 Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): Logical unit not supported Oct 10 17:13:14 nas kernel: (ch0:isp0:0:0:1): Unretryable error What am I missing? Thanks. :-) p -- Paul Chvostek <[email protected]> Operations / Abuse / Whatever it.canada, hosting and development http://www.it.ca/ _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]"
