Steve Polyack wrote:
Alexander Motin wrote:
Steve Polyack wrote:
I'm about to try today's head and patch. I'll let you know how it
goes.
Ok. Just to be sure it is not cabling issue (I have seen such), try also
limit port speed to 1.5Gbps by adding to loader.conf:
hint.siisch.0.sata_rev=1
hint.siisch.1.sata_rev=1
hint.siisch.2.sata_rev=1
hint.siisch.3.sata_rev=1
Here's a dmesg from todays head and your patch from this morning.
It's still only sensing one disk over the two PMs. Forcing
SATA1/1.5Gbps operation didn't change anything.
I should also note that if I do a 'camcontrol rescan', the first PM
(with 5 physical drives attached, none detected) will vanish.
Physically unplugging and reconnecting the device does the same.
COMMAND=/sbin/camcontrol rescan all
siisch0: Timeout on slot 29
siisch0: siis_timeout is 00000000 ss 20000000 rs 20000000 es 00000000
sts 801f2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: device reset time=0ms
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(aprobe0:siisch0:0:15:0): Command timed out
(aprobe0:siisch0:0:15:0): error 5
(aprobe0:siisch0:0:15:0): Retries Exhausted
(pass0:siisch0:0:15:0): lost device
(pass0:siisch0:0:15:0): removing device entry
(pmp0:siisch0:0:15:0): lost device
siisch0: Timeout on slot 30
siisch0: siis_timeout is 00000000 ss 40000000 rs 40000000 es 00000000
sts 801f0000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
(pmp0:siisch0:0:15:0): Request Requeued
(pmp0:siisch0:0:15:0): Retrying Command
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: device reset time=0ms
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(aprobe0:siisch0:0:0:0): Command timed out
(aprobe0:siisch0:0:0:0): error 5
(aprobe0:siisch0:0:0:0): Retries Exhausted
(pmp0:siisch0:0:15:0): Request Requeued
(pmp0:siisch0:0:15:0): Retrying Command
(aprobe0:siisch2:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
PMP freeze: 0
PM ports: 5
PM RESET 0 skipping
PM RESET 1
PM RESET 2
PM RESET 3
PM RESET 4
PM reset done
PM connect done
PM status: 0 - 00000123
PM status: 1 - 00000000
PM status: 2 - 00000000
PM status: 3 - 00000000
PM status: 4 - 00000000
PMP release: 0
_______________________________________________
freebsd-hardware@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"
