FreeBSDers,
Has anyone gotten an MCS9901 based 2-port RS232 PCI-E card working with FreeBSD
8?
The actual card is a StarTech PEX2S552. pci id from pciconf -lv looks like:
no...@pci0:4:0:0: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
class = simple comms
subclass = UART
no...@pci0:4:0:1: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
class = simple comms
subclass = UART
I tried just dropping this into dev/puc/pucdata.c
--- pucdata.c.org 2010-02-01 13:46:09.000000000 -0800
+++ pucdata.c 2010-02-01 13:47:35.000000000 -0800
@@ -790,6 +790,12 @@
PUC_PORT_2S, 0x10, 4, 0,
},
+ { 0x9710, 0x9901, 0x1000, 2,
+ "MosChip (Awas Netmos) MCS9901 based 2-port serial",
+ DEFAULT_RCLK,
+ PUC_PORT_2S, 0x10, 4, 0,
+ },
+
{ 0x9710, 0x9835, 0xffff, 0,
"NetMos NM9835 Dual UART and 1284 Printer port",
DEFAULT_RCLK,
but no luck.
Any advice you can give is appreciated.
--Dan
--
Dan Grillo [email protected] (650) 299-1470
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[email protected]"
