Hi
I've a D-Link Quad Serial PCI-Express Card I try to use with
FreeBSD 6. It's 16C550 compatible.
pciconf -lv reports
non...@pci2:0:0: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
class = simple comms
subclass = UART
non...@pci2:0:1: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
class = simple comms
subclass = UART
non...@pci2:0:2: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
class = simple comms
subclass = UART
non...@pci2:0:3: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
class = simple comms
subclass = UART
pciconf -lb reports
non...@pci2:0:0: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
non...@pci2:0:1: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
non...@pci2:0:2: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
non...@pci2:0:3: class=0x070002 card=0x1000a000 chip=0x99019710 rev=0x00
hdr=0x00
how do I get the puc driver to recognize this card.
Regards
Estartu
-
-------------------------------------------------
Gerhard Schmidt | E-Mail: [email protected]
TU-München |
WWW & Online Services | PGP-PublicKey on Request
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[email protected]"
