Thanks for the info. I've decided I'm going to send this card back. I'll try Brandon's suggestion first and get another of the same, and if that doesn't work I'll try something from a different vendor.
I'm also using ZFS - main reason I migrated to FreeBSD in the first place. On Jan 25, 2011, at 4:23 AM, Jonas Lund wrote: > I also bought a highpoint (17xx something) card for my previous > home/smb-server and i could never get it booting either regardless of > "freebsd support". It was based on a VIA EPIA motherboard. > > Ended up going with softraid (gmirror).. it worked well enough but be > warned that after an extended uptime that a gmirror sync + fsck will > cause a seek storm that will take ages to finish. Using ZFS for my > current setup with duplication. > > 2011/1/16 Cameron Tune <[email protected]>: >> Last month I purchased a Highpoint 2320 raid card, >> http://www.newegg.com/Product/Product.aspx?Item=N82E16816115026 , for my >> FreeBSD server. I'm new to the FreeBSD world - so please bear with me as I >> try to solve the following issue. >> >> With the card installed - the server hangs during the boot process. I don't >> even get to the standard FreeBSD boot menus (loader prompt, single-user >> mode, etc.), rather the freeze occurs after a "console" message and then a >> listing of physical disks. A picture of where the hang occurs is at >> http://www.camerontune.com/images/photo.jpg . >> >> As far as I can tell this card is supported on FreeBSD (running 8.1 STABLE >> i386). I've updated the motherboard bios, and have also monkeyed around >> with just about every possible setting in the card's bios. Motherboard is a >> Gigabyte GA-EP45-UD3P. >> >> I've combed through every possible log I can find in /var/logs - but I'm not >> finding anything that starts this early in the boot process. I've also >> ensured that all drivers are present and loaded in loader.conf - however I >> don't think I'm even getting to the point of drivers being loaded. >> >> Any thoughts are appreciated - and please let me know if there's any >> additional information I can provide that may help diagnose the >> problem._______________________________________________ >> [email protected] mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware >> To unsubscribe, send any mail to "[email protected]" >> _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]"
