> > ________________________________________ > Från: [email protected] [[email protected]] > för Alexander Konovalenko [[email protected]] > Skickat: den 18 mars 2012 12:14 > Till: [email protected] > Ämne: freebsd 9.0 amd64 memstick installation does not detect SATA 3.0 drives > > Hi, > > I tried to install FreBSD 9.0 amd64 from a memory stick and it did not detect > any of my SATA3.0 hard drives except actual 8Gb stick. The same mem stick > detects fine SATA2 hdds on older machine. > > Any suggestions? > > > ******* My hardware: > > hard drives: > > Western Digital Caviar® Green 2TB SATA 6Gb/s, (SATA 3.0), RPM = IntelliPower, > 64MB, 3.5" > Western Digital Caviar® Blue 500GB SATA 6Gb/s (SATA 3.0), 16MB, 7200RPM, 3.5" > > the rest: > > Gigabyte GA-970A-UD3, Socket-AM3+ ATX, 970+SB950, DDR3, 2xPCIe(2.0)x16, SATA > 6Gb/s, USB 3.0, FW > > AMD FX-6200 6-Core Processor Socket- AM3+, 3.8Ghz, 125W, 6MB L2 + 8MB L3 > Cache, 32nm > > 8Gb RAM in total: Corsair Vengeance DDR3 1600MHz 4GB CL9 > Video: Gainward GeForce GT 430 1GB PhysX CUDA PCI-Express 2.0, GDDR3, DVI, > native-HDMI, 535MHz, 64bit > > > regards, > Alexander > >
answering on my own email: my solution of this problem was to use CD installation of FreeBSD 8.3 amd64 and it worked. Then world/kernel build and upgrade to current 9 and machine is running fine. Hope may help to somebody. regards Alexander _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]"
