On 6/1/2012 10:30 AM, John Baldwin wrote:
>
> BTW, it would be interesting to see what the AER errors are. Can you apply
> www.freebsd.org/~jhb/patches/pciconf_e.patch to pciconf and paste the output
> of 'pciconf -lcbe' for re0?
>
Hi,
Using the pciconf from HEAD,
re0@pci0:4:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x03
hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0, size 256, disabled
bar [18] = type Memory, range 64, base 0xfe200000, size 4096, disabled
bar [20] = type Prefetchable Memory, range 64, base 0xf0000000,
size 16384, disabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap ff[50] = unknown
PCI errors = Master Data Parity Error
Sent Target-Abort
Received Target-Abort
Received Master-Abort
Signalled System Error
Detected Parity Error
---Mike
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, [email protected]
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[email protected]"
